WLX-PRO - Microphone Azden - Free user manual and instructions
Find the device manual for free WLX-PRO Azden in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Microphone System |
| Brand | Azden |
| Model | WLX-PRO |
| System Type | VHF FM Wireless |
| Frequency Band | 174-216 MHz (VHF) |
| RF Power Output | 50 mW |
| Operating Range | Up to 300 ft (91 m) line of sight |
| Audio Input | Built-in electret condenser microphone |
| Audio Output | 3.5mm mini jack |
| Transmitter Battery | 1x 9V alkaline battery |
| Receiver Battery | 1x 9V alkaline battery |
| Battery Life | Approximately 6 hours |
| Receiver Dimensions | 4.3 x 2.4 x 0.9 in (approx.) |
| Transmitter Dimensions | 3.5 x 2.0 x 0.9 in (approx.) |
| Receiver Weight | 5.6 oz (approx.) |
| Transmitter Weight | 4.2 oz (approx.) |
| Mounting | Camera shoe mount |
| Connector Type | Mini connector for camcorder input |
| Control Functions | Squelch control, LED power and battery indicator |
| Maintenance | Wipe with dry cloth, avoid moisture |
Frequently Asked Questions - WLX-PRO Azden
How do I set up the Azden WLX-PRO wireless microphone system?
To set up the WLX-PRO, first insert a fresh 9V battery into the transmitter and the receiver. Attach the receiver to your camera's shoe mount and connect its 3.5mm output to the camera's microphone input via the included cable. Turn on both units and set the same frequency channel on transmitter and receiver. The LED indicators will confirm power and signal reception.
What type of batteries does the WLX-PRO use?
The WLX-PRO uses standard 9V alkaline batteries for both the transmitter and the receiver. For longer battery life, it is recommended to use lithium 9V batteries as they last significantly longer and perform better in cold conditions.
What is the operating range of the WLX-PRO?
The WLX-PRO offers an operating range of up to 300 feet (91 meters) in open line-of-sight conditions. Walls, obstacles, and RF interference can reduce this range significantly, so keep a clear path between transmitter and receiver for best performance.
Can the WLX-PRO be used with other microphones?
The WLX-PRO is designed primarily with a built-in electret condenser microphone on the bodypack transmitter. It does not have an external microphone input on the transmitter, so you cannot connect a lavalier or other external mic directly. However, you can use the receiver's audio output to feed any recording device that accepts a 3.5mm line or mic input.
How do I reduce interference with the WLX-PRO?
To reduce interference with the WLX-PRO, first change the frequency channel on both transmitter and receiver to an unused one. Keep the system away from other wireless devices like Wi-Fi routers and GSM phones. Also, ensure the RF squelch is not set too low, which can cause hiss.
How do I clean and maintain the WLX-PRO?
For cleaning the WLX-PRO, use a soft, dry cloth to wipe the exterior of both the transmitter and receiver. Do not use water, solvents, or abrasive cleaners. Avoid exposing the system to rain, moisture, or extreme temperatures. When not in use, remove batteries to prevent corrosion and store in a cool, dry place.
Can I replace the antenna on the WLX-PRO?
The WLX-PRO has a fixed rubber antenna on both the transmitter and receiver that is not user-replaceable. If the antenna is damaged, we recommend contacting Azden customer support or an authorized service center for repair, as improper replacement may void the warranty.
Is the WLX-PRO compatible with modern cameras?
The WLX-PRO outputs a low-impedance mono signal via its 3.5mm mini jack, which is compatible with most modern cameras, smartphones (with a TRRS adapter), and audio recorders. Some cameras may require setting the input to external microphone mode. If the camera lacks a 3.5mm jack, use an appropriate adapter.
What is the battery life of the WLX-PRO?
With fresh 9V alkaline batteries, the WLX-PRO provides about 6 hours of continuous operation. Using lithium 9V batteries can extend this up to 10 hours. Monitor the LED indicator; when it dims or flashes, it's time to replace the batteries.
How do I troubleshoot no sound from the WLX-PRO?
If there is no sound, first check battery levels in both the transmitter and receiver. Verify that the audio output cable is securely connected to the camera and that the camera's input is set to external mic. Ensure both units are on the same channel and not in squelch mode that might mute too aggressively. Also, try moving closer to see if you're out of range. If the problem persists, test with another cable or contact support.
User questions about WLX-PRO Azden
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Microphone in PDF format for free! Find your manual WLX-PRO - Azden and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WLX-PRO by Azden.
USER MANUAL WLX-PRO Azden
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Azden
Model : WLX-PRO
Category : Microphone