MTX3-34-M - Switch Kramer - Free user manual and instructions
Find the device manual for free MTX3-34-M Kramer in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Matrix Switcher |
| Brand | Kramer |
| Model | MTX3-34-M |
| Video Inputs | 3 x Composite Video (BNC) |
| Video Outputs | 4 x Composite Video (BNC) |
| Audio Inputs | 3 x Stereo Audio (RCA or Terminal Block) |
| Audio Outputs | 4 x Stereo Audio (RCA or Terminal Block) |
| Video Resolution | Up to 576i (PAL) / 480i (NTSC) |
| Bandwidth | 100 MHz (-3dB) |
| Control Methods | Front Panel Buttons, Infrared Remote, RS-232 |
| Switching Type | Matrix Switching (Any Input to Any Output) |
| Rack Mountable | Yes, 1U Rack Kit Included |
| Dimensions (W x D x H) | 483 mm x 152 mm x 44 mm |
| Weight | 2.2 kg |
| Power Supply | 100-240 V AC, 50/60 Hz |
| Power Consumption | 20 W |
| Operating Temperature | 0°C to 40°C |
| Cleaning and Maintenance | Wipe with a dry soft cloth; do not use liquids |
| Safety Compliance | CE, FCC, RoHS |
| Repairability | Serviceable by authorized Kramer service centers |
| General Information | Designed for professional AV installations |
Frequently Asked Questions - MTX3-34-M Kramer
How do I switch between inputs on the MTX3-34-M?
You can switch using the front panel buttons, the included infrared remote, or via RS-232 commands. Press the OUTPUT button, then the corresponding INPUT button to route any input to any output.
Does the MTX3-34-M support HDMI or VGA signals?
No, the MTX3-34-M is designed for composite video and stereo audio only. It handles standard analog video signals up to 480i/576i.
What is the maximum video cable length I can use?
For reliable composite video transmission, use high-quality 75-ohm coaxial cable up to 150 meters. Beyond that, signal quality may degrade.
How can I control the matrix switcher via RS-232?
Connect the device to your computer or controller via an RS-232 cable. Use Kramer protocol commands, such as #INPUT_OUTPUT to route signals. The full command set is detailed in the user manual.
Can I mount the MTX3-34-M in a standard 19-inch rack?
Yes, the unit comes with rack mount brackets and occupies 1U of rack space. Install it with four screws for secure mounting.
How do I reset the device to factory defaults?
To perform a factory reset, power off the unit, then press and hold the front panel buttons 1 and 3 while powering on. Release the buttons after 3 seconds. All settings will return to defaults.
What type of audio connectors does it use?
The MTX3-34-M provides terminal block connectors for balanced audio inputs and outputs, and RCA connectors for unbalanced stereo audio, depending on the version. Check your unit's back panel.
Is the power supply built-in or external?
The device features a built-in universal power supply that accepts 100-240 V AC, so you only need a standard IEC power cord.
Can I control multiple Kramer matrix switchers together?
Yes, using the RS-232 control and Kramer's cascading protocol, you can connect multiple units and control them as a larger matrix. The necessary commands are available in the manual.
How do I clean the MTX3-34-M without damaging it?
Disconnect the power before cleaning. Use a soft, dry microfiber cloth to gently wipe the front panel and enclosure. Do not use liquid cleaners, sprays, or abrasive materials.
User questions about MTX3-34-M Kramer
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual MTX3-34-M - Kramer and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MTX3-34-M by Kramer.
USER MANUAL MTX3-34-M Kramer
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Kramer
Model : MTX3-34-M
Category : Switch