Neptwin RGB - Computer Cooling DeepCool - Free user manual and instructions
Find the device manual for free Neptwin RGB DeepCool in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Dual-tower CPU air cooler |
| Brand | DeepCool |
| Model | Neptwin RGB |
| Color | Black |
| Compatible CPU Sockets | Intel LGA 2066/2011-v3/2011/1366/1200/1150/1155/1156 and AMD AM4/AM3+/AM3/AM2+/AM2/FM2+/FM2/FM1 |
| Heat Pipes | 6 heat pipes, 6 mm diameter |
| Fan Dimensions | 120 mm x 120 mm x 25 mm |
| Number of Fans | 2 (push-pull configuration) |
| Fan Bearing Type | Hydrodynamic bearing |
| Fan Speed | 900 - 1500 RPM (PWM controlled) |
| Airflow | 60.6 CFM per fan |
| Noise Level | 17.8 - 27.3 dBA |
| Lighting | RGB LED lighting on top cover |
| Connectors | 4-pin PWM fan connector, 4-pin 12V RGB connector |
| Heatsink Dimensions | 140 mm x 110 mm x 159 mm |
| Weight | 1.06 kg with fans |
| Mounting Hardware | Universal bracket for Intel and AMD included |
| Thermal Paste | Pre-applied on copper base; reapply if remounting |
| Maintenance | Use compressed air or soft brush to remove dust; avoid liquid cleaners |
| Safety Features | Secure locking mechanism, rubber pads reduce vibration |
| Spare Parts and Repairability | Replacement 120 mm fans, fan clips and mounting kits available |
| Warranty | 2-year limited manufacturer warranty |
Frequently Asked Questions - Neptwin RGB DeepCool
What CPU sockets are supported by the DeepCool Neptwin RGB?
The Neptwin RGB works with Intel LGA 2066, 2011-v3, 2011, 1366, 1200, 1150, 1155, 1156 and AMD AM4, AM3+, AM3, AM2+, AM2, FM2+, FM2, FM1. Confirm your motherboard socket before installation.
How do I install the Neptwin RGB?
Install the backplate behind the motherboard, attach the mounting brackets, and secure the cooler with screws. Use the X-pattern tightening method to keep pressure even on the CPU.
How can I control the RGB lighting?
Connect the 4-pin 12V RGB cable to a motherboard RGB header. Use your motherboard software such as ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion or ASRock Polychrome to customize colors and effects.
How should I clean the cooler?
Unplug the fans and use compressed air to remove dust from the fins. Wipe the fan blades with a soft, dry cloth. Do not use water or solvent cleaners on the RGB circuit.
Is the Neptwin RGB good for overclocking?
Yes, the six heat pipes and dual-tower fin stacks provide strong cooling for moderate overclocking. Use good case airflow and monitor CPU temperatures when overclocking.
Does the cooler come with thermal paste?
Yes, thermal paste is pre-applied to the copper base. If you remove the cooler and reinstall it, apply a fresh layer of a quality thermal compound to the CPU heat spreader.
Can I replace the fans and keep the RGB?
You can replace the fans with standard 120 mm PWM fans. The included RGB cable is part of the top cover, so RGB lighting remains available after fan replacement.
Will the cooler block RAM slots?
The cooler is designed with a offset fin stack, so it clears standard height RAM. For RAM with tall heatsinks, verify clearance or install the fan on the opposite side.
What noise level can I expect?
At maximum speed, the two 120 mm fans produce about 27.3 dBA. The PWM function adjusts speed between 900 and 1500 RPM, keeping the cooler quiet during light loads.
How do I know the cooler is properly mounted?
After tightening all screws, check that the cooler does not move when gently pushed. The base should sit completely on the CPU IHS and the mounting screws should be hand-tight but not over-tightened to avoid damaging the motherboard.
User questions about Neptwin RGB DeepCool
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Computer Cooling in PDF format for free! Find your manual Neptwin RGB - DeepCool and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Neptwin RGB by DeepCool.