Phaser 5335 - Printer XEROX - Free user manual and instructions
Find the device manual for free Phaser 5335 XEROX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Monochrome Laser Printer |
| Dimensions (W x D x H) | 400 x 500 x 300 mm (15.75 x 19.69 x 11.81 in) |
| Weight | 20 kg (44.1 lb) |
| Power Consumption | Standby: 50 W; Operating: 600 W; Sleep: 5 W |
| Print Speed | Up to 55 pages per minute (A4) |
| Print Resolution | 1200 x 1200 dpi |
| Paper Input Capacity | 500-sheet standard tray + 100-sheet multipurpose tray |
| Paper Output Capacity | 500-sheet face-down output bin |
| Duplex Printing | Automatic (standard) |
| Connectivity | USB 2.0, Ethernet 10/100/1000 Base-T |
| Monthly Duty Cycle | Up to 200,000 pages |
| Processor | 500 MHz |
| Memory | 256 MB standard (expandable to 1 GB) |
| Supported Media Sizes | A4, A5, B5, Letter, Legal, Executive, Envelopes |
| Display | 4-line backlit LCD panel |
| Operating Systems | Windows, macOS, Linux, UNIX |
| Maintenance | Replace toner cartridge, clean fuser and paper path |
| Safety Standards | Energy Star certified, CE marked |
| Reparability | Replaceable fuser unit, transfer roller, separation roller |
| General Warranty | 1-year return-to-depot standard warranty |
Frequently Asked Questions - Phaser 5335 XEROX
How do I install the toner cartridge in the Xerox Phaser 5335?
Open the front cover, slide the toner cartridge out of its packaging, shake it gently side to side to distribute the toner, then insert it into the slot until it clicks into place. Close the front cover and run a test print.
How can I connect the printer to my network via Ethernet?
Connect an Ethernet cable from the printer's network port to your router or switch. On the control panel, go to Network Settings, select Ethernet, and enable DHCP or manually assign an IP address. Install the driver and choose the network connection.
How do I clear a paper jam in the Phaser 5335?
Open the top cover and remove the drum cartridge. Check the fuser area and paper feed rollers for jammed paper. Pull the paper out gently, avoiding tears. Reinstall the drum, close the cover, and press Continue on the control panel.
How to enable automatic duplex printing on this printer?
In the printer driver, open the Printing Preferences, go to the Paper tab, and select Duplex Automatic under the '2-Sided Printing' section. This will allow the printer to automatically print on both sides of the page.
What type of toner cartridge does the Xerox Phaser 5335 use?
This printer uses the Xerox Phaser 5335 Toner Cartridge with an approximate yield of 15,000 pages. For high-capacity needs, the high-yield cartridge provides about 25,000 pages. Always use genuine Xerox toner to avoid damage.
How do I set a static IP address on the Phaser 5335?
On the control panel, navigate to System > Network Settings > TCP/IP. Select Static and enter the IP address, subnet mask, and gateway. Press OK to confirm. The printer will restart the network interface.
How often should I clean the printer?
It is recommended to clean the printer every 10,000 pages or if prints show lines or spots. Use a soft, lint-free cloth to wipe the exterior and lightly clean the paper path. Avoid touching the transfer roller or drum surface.
How do I replace the drum unit?
Open the top cover, hold the handle of the drum cartridge, and lift it out. Unpack the new drum unit, remove the protective paper, insert it into the printer until it engages. Close the cover and reset the drum counter via System > Maintenance.
How can I update the printer firmware?
Download the latest firmware file from the Xerox support website. Connect the printer via USB or network, then use the Web Firmware Update tab in the embedded web server (type the printer IP in a browser) to upload the .bin file. Follow on-screen instructions.
How do I resolve common error codes like 'E1' or 'E4'?
Error codes indicate specific issues. E1 usually means a paper jam; clear the jam as described. E4 indicates a door is open; securely close all covers. For persistent errors, turn off the printer, wait 30 seconds, and restart. If the issue persists, contact service.
User questions about Phaser 5335 XEROX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Printer in PDF format for free! Find your manual Phaser 5335 - XEROX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Phaser 5335 by XEROX.
USER MANUAL Phaser 5335 XEROX
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : XEROX
Model : Phaser 5335
Category : Printer