BLCT-101G - Oven Blodgett - Free user manual and instructions
Find the device manual for free BLCT-101G Blodgett in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Countertop Gas Convection Oven |
| Brand | Blodgett |
| Model | BLCT-101G |
| Category | Oven |
| Fuel Type | Natural Gas or Propane (convertible) |
| Installation | Countertop |
| Cooking Capacity | 5 racks (11 positions) |
| Pan Capacity | Up to 4 half-size (18 x 13 inch) baking pans |
| Exterior Dimensions (W x D x H) | 32 x 30 x 28 inches |
| Interior Dimensions (W x D x H) | 24 x 18 x 16 inches |
| Temperature Range | 200°F to 500°F (93°C to 260°C) |
| Control System | Thermostatic gas valve with electric spark ignition |
| Heat Input | 40,000 BTU/hr |
| Electrical Requirements | 120V / 60Hz, 2.5 Amps |
| Exterior Material | Stainless steel |
| Interior Material | Stainless steel with coved corners |
| Door Type | Double-pane tinted glass door |
| Ventilation | Direct exhaust stack included |
| Weight | 250 lbs (approx) |
| Cleaning & Maintenance | Removable interior panels and door gaskets for easy access |
| Safety Features | Flame supervision system, overheat thermostat, cool-touch handles |
| Certifications | NSF, UL, CSA |
| Warranty | 2-year limited warranty |
Frequently Asked Questions - BLCT-101G Blodgett
How do I convert the oven from natural gas to propane?
To convert from natural gas to propane, a certified technician must install the propane orifice kit and adjust the gas pressure according to the instructions on the unit's data plate. Never attempt this conversion yourself as it involves high-pressure gas and may void the warranty.
What is the recommended temperature for baking pastries in this oven?
For most baked goods, a temperature between 325°F and 375°F (163°C to 190°C) is recommended. Always preheat the oven for at least 15 minutes and use the convection fan to ensure even heat distribution.
How often should I clean the oven and what products are safe?
Clean the stainless steel interior weekly with a mild detergent and warm water. Do not use abrasive cleaners or steel wool, as they can scratch the surface. Remove and wash the racks and drip tray separately with soapy water. Monthly, check and clean the fan blades and gas burner ports.
Why is my oven not heating up properly?
First, verify that the gas supply valve is open and the pilot light is lit. If the pilot is out, relight it following the instructions in the manual. If the flame is weak or the igniter fails, contact a qualified service technician to check the gas pressure, thermocouple, or igniter assembly.
How do I replace the door gasket?
The door gasket is held in place by a retaining channel. Gently pull the old gasket out, clean the channel, and press the new gasket into place evenly. Ensure it is seated firmly to maintain a proper seal. Replacement gaskets are available from authorized parts dealers.
What electrical supply does this oven require?
The oven requires a 120V / 60Hz electrical connection for the control system, ignition, and interior light. The maximum amp draw is 2.5 Amps. A standard grounded outlet is sufficient, but it must be properly wired and grounded.
How can I adjust the oven temperature calibration?
The thermostat is calibrated at the factory, but you can adjust it by turning the calibration screw near the thermostat bulb behind the control panel. Use a small screwdriver, turn clockwise to increase the temperature or counterclockwise to decrease. Check the actual temperature with an oven thermometer to verify the adjustment.
Is it safe to place the oven on a standard kitchen countertop?
The oven is designed for countertop installation and includes adjustable leveling legs. Ensure the countertop can support the unit's weight (approximately 250 lbs) and is made of heat-resistant material. Maintain at least 6 inches of clearance from combustible walls and 12 inches above the unit.
What should I do if the flame goes out during operation?
If the flame goes out, immediately turn the gas valve to the off position and wait 5 minutes before attempting to relight. Check that the thermocouple is clean and functioning. If the problem persists, the flame safety valve may be defective and should be inspected by a technician.
How do I maintain the convection fan motor?
Keep the fan motor and ventilation vents free of grease and debris. Wipe the fan blades and interior around the fan with a damp cloth monthly. If the fan starts making unusual noises or runs slowly, shut the oven off and contact service to inspect the motor and bearing.
User questions about BLCT-101G Blodgett
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Oven in PDF format for free! Find your manual BLCT-101G - Blodgett and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BLCT-101G by Blodgett.
USER MANUAL BLCT-101G Blodgett
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Blodgett
Model : BLCT-101G
Category : Oven