Hybrid 502 - Loudspeaker Morel - Free user manual and instructions
Find the device manual for free Hybrid 502 Morel in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Bookshelf Loudspeaker |
| Brand | Morel |
| Model | Hybrid 502 |
| Dimensions (H x W x D) | 350 x 200 x 280 mm (13.8 x 7.9 x 11.0 in) |
| Weight | 8.2 kg (18.1 lbs) |
| Power Handling (RMS) | 100 W |
| Peak Power | 200 W |
| Impedance | 8 Ω |
| Sensitivity | 88 dB (2.83V/1m) |
| Frequency Response | 42 Hz – 22 kHz (±3 dB) |
| Crossover Frequency | 2.2 kHz |
| Tweeter | 1" Soft Dome |
| Woofer | 6.5" Paper Cone |
| Enclosure Type | Bass Reflex (Rear Port) |
| Connectivity | Bi-wire binding posts |
| Recommended Amplifier Power | 20 – 120 W |
| Placement | Bookshelf or stand mount |
| Finish | Black Ash vinyl |
| Maintenance | Wipe with dry cloth; avoid liquids |
| Safety | Handle with care; keep away from moisture |
| Spare Parts | Tweeter and woofer available from authorized service |
Frequently Asked Questions - Hybrid 502 Morel
How should I position the Morel Hybrid 502 speakers?
Place them on sturdy stands or bookshelves at ear level when seated. Angle them slightly toward the listening position for optimal stereo imaging. Avoid placing them directly against walls to prevent excessive bass buildup.
What is the recommended amplifier power range?
The Hybrid 502 handles 20 to 120 watts RMS per channel. Use an amplifier within this range to avoid distortion or damage at high volumes.
How do I connect the speakers with bi-wiring terminals?
The binding posts accept bare wire, banana plugs, or spade connectors. For standard connection, keep the metal jumpers in place and connect one pair of speaker cables. For bi-wiring or bi-amping, remove the jumpers and use separate cables for tweeter and woofer circuits.
Can I use the Hybrid 502 as part of a home theater system?
Yes, they work well as front or rear speakers. Pair them with a matching center channel and a subwoofer for a complete surround sound setup.
How do I clean the speaker cabinets?
Wipe the cabinets with a soft, dry microfibre cloth. Do not use water or cleaning sprays on the drivers. For grilles, gently vacuum or brush to remove dust.
What should I do if one speaker produces no sound?
First, check all connections and speaker cables. Swap the left and right speakers to determine if the issue is the speaker or the amplifier. If the problem persists, consult an authorized service center for repair.
Are the tweeter and woofer user-replaceable?
Yes, spare drivers are available. However, we recommend having them installed by a qualified technician to avoid damage. Contact Morel authorized service for genuine parts.
What is the optimal listening distance?
The Hybrid 502 is designed for near-field to midfield listening, typically 1.5 to 3 meters. Ensure the distance between the speakers is about 1.5 to 2.5 meters with the listening position forming an equilateral triangle.
How do I break in new speakers?
Play music at moderate volume for 20 to 50 hours to allow the drivers to loosen and achieve full performance. Vary frequency content during break-in.
Can I mount the Hybrid 502 on the wall?
The cabinet is not designed for wall mounting. Use the supplied rubber feet for shelf placement or invest in third-party speaker stands that fit the bottom dimensions.
User questions about Hybrid 502 Morel
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual Hybrid 502 - Morel and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Hybrid 502 by Morel.
USER MANUAL Hybrid 502 Morel
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Morel
Model : Hybrid 502
Category : Loudspeaker