AVC-3570 - Receiver DENON - Free user manual and instructions
Find the device manual for free AVC-3570 DENON in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | AV Surround Receiver |
| Brand | DENON |
| Model | AVC-3570 |
| Number of Channels | 7.1 |
| Power Output | 110W per channel (8 ohms, 20Hz-20kHz, 0.08% THD) |
| Audio Decoders | Dolby Digital, DTS, Dolby Pro Logic II |
| Frequency Response | 10Hz - 100kHz (+1/-3dB) |
| Signal-to-Noise Ratio | 98dB |
| Speaker Impedance | 4-16 ohms |
| Audio Inputs | 4x Optical, 3x Coaxial, 5x Analog |
| Video Inputs | Composite, S-Video, Component |
| Outputs | 7.1 preamp outputs, subwoofer output |
| Dimensions (W x H x D) | 434mm x 170mm x 417mm |
| Weight | 12.6 kg |
| Power Supply | 230V AC, 50/60Hz |
| Power Consumption | 350W |
| Standby Power Consumption | 0.5W |
| Display | Fluorescent display |
| Tone Control | Bass and Treble |
| Remote Control | Included |
| Maintenance | Clean with a soft, dry cloth. Do not use liquids or sprays. |
| Safety | Ensure adequate ventilation, do not expose to moisture, unplug during storms. |
| Repairability | Authorized service centers and genuine spare parts available. |
| General Information | Designed for home theater use, supports multiple zone audio. |
Frequently Asked Questions - AVC-3570 DENON
How do I connect external speakers to the Denon AVC-3570?
Use the speaker terminals on the rear panel. Connect each speaker to its matching terminal (front left, front right, center, surround, surround back). Ensure the impedance is between 4 and 16 ohms.
What audio formats are supported by the AVC-3570?
The receiver supports Dolby Digital, DTS, and Dolby Pro Logic II decoding, allowing you to enjoy multi-channel audio from DVDs, Blu-rays, and gaming consoles.
How can I set up the FM tuner on this receiver?
Press the Tuner button on the remote or front panel. Use the Tuning up/down buttons to search for stations. Store your favorite stations using the Memory button.
Can I connect a subwoofer to the AVC-3570?
Yes, connect an active subwoofer to the Subwoofer Pre-Out jack. To adjust the crossover, use the speaker setup menu.
What should I do if the receiver doesn't power on?
First, check the power cord connection and the wall outlet. Verify that the standby indicator is lit. If not, press the Power button. If it still fails, try resetting the unit by unplugging it for 10 minutes.
How do I clean the Denon AVC-3570?
Turn off and unplug the receiver. Use a soft, dry cloth to wipe the exterior. Avoid using chemical cleaners or water, as they can damage the finish.
Can I listen to music in a second room with this receiver?
Yes, the AVC-3570 supports multi-zone audio. Connect speakers in the second zone to the dedicated zone 2 outputs and enable the zone 2 function via the remote or front panel.
How do I calibrate speaker levels?
Use the Test Tone mode in the setup menu. The receiver will output a test tone through each speaker. Adjust the level using the Level buttons until all speakers match the reference level.
What is the maximum number of audio inputs?
The receiver has 4 optical, 3 coaxial, and 5 analog audio inputs, giving you plenty of options for connecting sources.
Does the receiver have a headphone output?
Yes, there is a dedicated headphone jack on the front panel. When headphones are connected, the speaker outputs are automatically muted.
User questions about AVC-3570 DENON
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual AVC-3570 - DENON and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AVC-3570 by DENON.
USER MANUAL AVC-3570 DENON
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DENON
Model : AVC-3570
Category : Receiver