TSW12 - Loudspeaker MTX Audio - Free user manual and instructions
Find the device manual for free TSW12 MTX Audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Loudspeaker (Subwoofer) |
| Brand | MTX Audio |
| Model | TSW12 |
| Speaker Size | 12 inches |
| Impedance | 4 ohms |
| Power Handling (RMS) | 300 watts |
| Peak Power Handling | 600 watts |
| Frequency Response | 25 Hz - 500 Hz |
| Sensitivity | 87 dB |
| Cone Material | Mica-injected polypropylene |
| Surround Material | Butyl rubber |
| Voice Coil | 2-inch high-temperature aluminum |
| Magnet Type | Ferrite |
| Mounting Cutout Diameter | 11.06 inches |
| Mounting Depth | 5.5 inches |
| Sealed Enclosure Volume | 1.0 cu ft |
| Ported Enclosure Volume | 1.75 cu ft |
| Recommended Amplifier Power | 150-400 watts RMS |
| Terminal Type | Dual 4-ohm |
| Net Weight | 12.5 lbs |
| Dimensions (W x D x H) | 12.3 x 6.2 x 12.3 inches |
| Maintenance | Wipe with dry microfiber cloth |
| Cleaning | Avoid liquid cleaners; keep away from moisture |
| Safety | Ensure stable enclosure and proper wiring |
| Repairability | Replaceable surrounds and voice coils available |
Frequently Asked Questions - TSW12 MTX Audio
What is the difference between dual 4-ohm and single 4-ohm voice coils?
A dual 4-ohm voice coil allows wiring in parallel for a 2-ohm load or in series for an 8-ohm load, providing flexibility for amplifier matching. A single 4-ohm coil is fixed at 4 ohms.
What enclosure is recommended for the TSW12?
For deep bass, use a ported enclosure of 1.75 cu ft tuned to 35 Hz. For tight, accurate bass, use a sealed enclosure of 1.0 cu ft. Both perform well with the TSW12.
What amplifier power should I use with this subwoofer?
The TSW12 handles 300 watts RMS and has a peak of 600 watts. A recommended amplifier rating of 150-400 watts RMS per channel at 4 ohms is ideal to avoid distortion and damage.
How do I break in a new subwoofer?
Play music with moderate bass at low volume for the first 20-30 hours. This allows the suspension to loosen, improving excursion and overall sound quality.
Can I use the TSW12 in a sealed enclosure?
Yes, the TSW12 works well in a sealed enclosure of 1.0 cu ft. It provides accurate, tight bass and is easier to install in smaller spaces.
How do I clean the subwoofer?
Use a dry microfiber cloth to gently wipe the cone and surround. Never use liquid cleaners or allow water to reach the voice coil, as moisture can damage the speaker.
Is the TSW12 compatible with home audio systems?
Yes, as long as your home amplifier can drive a 4-ohm load and deliver sufficient power (150-400W RMS). It is primarily designed for car audio but works fine in home setups with proper enclosure.
What is the mounting depth required for the TSW12?
The TSW12 requires a mounting depth of 5.5 inches and a cutout diameter of 11.06 inches. Ensure your enclosure has enough clearance for the motor structure and terminals.
Does the TSW12 come with a grille?
No, the TSW12 is typically sold as a bare subwoofer without a grille. You can purchase a separate subwoofer grille for added protection in your vehicle or home.
How can I check if the subwoofer is working properly?
Test with a multimeter to read the voice coil resistance (around 3-4 ohms normally). Also, check for visual cone movement at low volume and listen for distortion, which may indicate a wiring issue or damaged coil.
User questions about TSW12 MTX Audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual TSW12 - MTX Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TSW12 by MTX Audio.
USER MANUAL TSW12 MTX Audio
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MTX Audio
Model : TSW12
Category : Loudspeaker