CRDSNU-B-32-125-PPS-A-MG-A1 - Industrial Automation Festo - Free user manual and instructions
Find the device manual for free CRDSNU-B-32-125-PPS-A-MG-A1 Festo in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Pneumatic cylinder |
| Manufacturer | Festo |
| Model | CRDSNU-B-32-125-PPS-A-MG-A1 |
| Category | Industrial Automation |
| Bore Size | 32 mm |
| Stroke Length | 125 mm |
| Actuation | Double-acting |
| Working Medium | Compressed air (filtered, lubricated or unlubricated) |
| Operating Pressure Range | 1.5 bar to 10 bar |
| Maximum Force (extend) | Approximately 482 N (at 6 bar) |
| Maximum Force (retract) | Approximately 415 N (at 6 bar) |
| Weight | Approximately 1.2 kg |
| Cushioning | Adjustable end-position cushioning (PPS-A) |
| Corrosion Resistance | Yes (stainless steel design) |
| Mounting Type | Via accessories or optional guide (MG) |
| Protection Class | IP40 |
| Maintenance | Check seals and lubrication periodically; clean external surfaces |
| Safety | Operate only within specified pressure range; ensure piping is secure |
| Spare Parts | Seal kits, piston rod, and mounting accessories available from Festo |
| General Information | Used for precise linear motion in automated machinery |
Frequently Asked Questions - CRDSNU-B-32-125-PPS-A-MG-A1 Festo
What is the operating pressure range for the Festo CRDSNU-B-32-125-PPS-A-MG-A1?
This cylinder works typically between 1.5 bar and 10 bar. For consistent performance, use filtered compressed air.
What maximum force can this cylinder produce?
At 6 bar, the extend force is about 482 N, and the retract force is approximately 415 N due to the rod area.
Is the CRDSNU-B-32-125-PPS-A-MG-A1 suitable for outdoor or corrosive environments?
Yes, the CRDSNU series features a corrosion-resistant stainless steel design, making it suitable for harsh environments.
How do I adjust the cushioning on this cylinder?
The cylinder has adjustable end-position cushioning. Use the cushioning screws at the cylinder ends to fine-tune the deceleration of the piston.
Can this cylinder be mounted vertically?
Yes, it can be mounted in any orientation. For vertical applications, ensure proper load distribution and adequate air pressure.
What maintenance is required for this Festo cylinder?
Periodically inspect seals and lubricate as recommended (if lubricated air is used). Keep the piston rod clean and wipe off any dirt or debris.
Can I use this cylinder with electric sensors to detect position?
Yes, the cylinder can be equipped with proximity sensors in the sensor grooves (if applicable) or via external mounts to detect end positions.
What is the meaning of the model code CRDSNU-B-32-125-PPS-A-MG-A1?
It encodes the product family (CRDSNU), bore 32 mm, stroke 125 mm, cushioning style (PPS-A), and a guide option (MG). The A1 suffix identifies a specific variant.
Where can I find spare parts for this cylinder?
Spare parts such as seal kits, piston rods, and mounting accessories are available from Festo's official catalog or authorized distributors.
What safety precautions should I take when operating this cylinder?
Always operate within the specified pressure range (max 10 bar). Ensure proper installation of air lines and fittings. When testing, secure the cylinder to prevent movement. Depressurize the system before maintenance.
User questions about CRDSNU-B-32-125-PPS-A-MG-A1 Festo
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Industrial Automation in PDF format for free! Find your manual CRDSNU-B-32-125-PPS-A-MG-A1 - Festo and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CRDSNU-B-32-125-PPS-A-MG-A1 by Festo.
USER MANUAL CRDSNU-B-32-125-PPS-A-MG-A1 Festo
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Festo
Model : CRDSNU-B-32-125-PPS-A-MG-A1
Category : Industrial Automation