CCTV-670 - Security Camera Steren - Free user manual and instructions

Find the device manual for free CCTV-670 Steren in PDF.

Steren CCTV-670 - Security Camera
📄 40 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Steren CCTV-670 - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type CCTV Security Camera
Brand Steren
Model CCTV-670
Image Sensor 1/3-inch CCD sensor
Video Resolution 700 TV lines
Lens Type Fixed focal length
Focal Length 3.6 mm
Minimum Illumination 0.1 Lux (0.01 Lux with IR)
Night Vision IR LEDs with up to 20 m range
Video Output 1 Vp-p composite, 75 Ohm
Power Supply 12 V DC adapter (included)
Power Consumption 3 W (typical)
Operating Temperature -10°C to 50°C
Dimensions 65 mm x 55 mm x 120 mm
Weight 300 g (without cables)
Mounting Wall or ceiling mountable
Protection Rating IP66 weatherproof
Maintenance Clean the lens with a soft, dry cloth
Safety Use only the supplied power adapter; avoid exposure to rain or moisture
Spare Parts Available from Steren authorized service centers
Repair Contact Steren technical support for any repair needs

Frequently Asked Questions - CCTV-670 Steren

How do I connect the CCTV-670 to a monitor?
Use a standard RCA composite cable to connect the camera's video output to the monitor's video input. Make sure both devices are powered on and set to the correct channel.
What type of power supply is required?
The camera requires a 12V DC power supply. A compatible adapter is included with the product. Always use the supplied adapter to avoid damage.
Can the CCTV-670 be used outdoors?
Yes, the camera has an IP66 weatherproof rating, making it suitable for outdoor use. Ensure all connections are properly sealed to maintain protection.
How do I adjust the camera angle?
The camera comes with an adjustable bracket. Loosen the screws on the bracket, tilt the camera to the desired angle, and tighten the screws to secure it.
What does the IR night vision do?
The built-in IR LEDs automatically activate in low-light conditions, providing black-and-white video up to 20 meters in complete darkness.
How should I clean the camera lens?
Use a soft, dry cloth to gently wipe the lens. Do not use chemical cleaners or water, as they may damage the lens coating.
Is the camera compatible with DVR systems?
Yes, it provides a standard composite video output, which is compatible with most analog DVRs and CCTV systems.
What should I do if there is no video signal?
Check the power connection, verify the video cable is firmly connected, and ensure the monitor is on the correct input. If the issue persists, test with another cable or monitor.
How far can the video cable run from the camera?
For best quality, keep the cable run under 100 meters using quality coaxial cable. Longer runs may require a video amplifier.
Does the camera support audio?
No, the CCTV-670 is a video-only camera. It does not have a built-in microphone or audio output.

User questions about CCTV-670 Steren

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

Your email remains private: it is only used to notify you if someone answers your question.

No questions yet. Be the first to ask one.

Download the instructions for your Security Camera in PDF format for free! Find your manual CCTV-670 - Steren and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CCTV-670 by Steren.

USER MANUAL CCTV-670 Steren

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Steren

Model : CCTV-670

Category : Security Camera