PULSA 27IF - Stapler Spit - Free user manual and instructions
Find the device manual for free PULSA 27IF Spit in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Pneumatic stapler |
| Brand | Spit |
| Model | PULSA 27IF |
| Staple type | 27 mm crown staples |
| Operating pressure | 4–7 bar (58–101 psi) |
| Weight | 1.6 kg (3.5 lbs) |
| Dimensions (L × W × H) | 255 × 82 × 210 mm |
| Magazine capacity | 100 staples |
| Staple width | 11.3 mm |
| Staple length range | 20–27 mm |
| Air inlet size | 1/4″ BSP |
| Exhaust | Adjustable 360° |
| Trigger type | Sequential / contact |
| Main applications | Insulation fixing, wood framing, furniture assembly |
| Maintenance | Daily lubrication, clean air filter |
| Safety features | Contact safety, anti-dry fire |
| Spare parts available | Yes, via authorized Spit service centers |
| Warranty | 1 year |
| CE marking | Yes |
Frequently Asked Questions - PULSA 27IF Spit
What type of stapler is the Spit PULSA 27IF?
The Spit PULSA 27IF is a pneumatic stapler designed for professional fastening tasks, especially suitable for insulation fixing and woodworking applications.
What is the recommended operating pressure?
The recommended operating pressure is 4 to 7 bar (58 to 101 psi). Always operate within this range for optimal performance and safety.
What staple sizes does it accept?
This stapler uses 27 mm crown staples with a width of 11.3 mm. It accommodates staple lengths from 20 to 27 mm.
How do I clear a jam in the stapler?
To clear a jam, first disconnect the air supply. Open the magazine, remove the jammed staple using pliers or a screwdriver, then close and test on a scrap piece. Always ensure the tool is unplugged before clearing jams.
What maintenance is required?
Regular maintenance includes lubricating moving parts with a few drops of pneumatic tool oil, cleaning the air filter, and checking for worn O-rings. Perform these checks daily for consistent performance.
What safety precautions should I take?
Always wear protective eyewear and follow local safety regulations. Never point the tool at yourself or others, disconnect the air supply when not in use, and use the contact safety mechanism properly to avoid accidental discharge.
Can I use different staple lengths?
Yes, the PULSA 27IF supports staple lengths from 20 mm to 27 mm. However, always use 27 mm crown staples to ensure proper feeding and prevent jams.
What is the weight and size of the tool?
The stapler weighs about 1.6 kg and measures 255 x 82 x 210 mm, making it compact and easy to handle for extended use.
Where can I find spare parts?
Spare parts are available through authorized Spit service centers and reputable dealers. Check the user manual for the parts list and contact your local distributor for orders.
How do I adjust the exhaust direction?
The exhaust is adjustable 360°. Simply rotate the exhaust cap to direct air away from yourself or work area, reducing dust blowback for a cleaner work environment.
User questions about PULSA 27IF Spit
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Stapler in PDF format for free! Find your manual PULSA 27IF - Spit and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PULSA 27IF by Spit.
USER MANUAL PULSA 27IF Spit
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Spit
Model : PULSA 27IF
Category : Stapler