PPN50Xi - Stapler Paslode - Free user manual and instructions
Find the device manual for free PPN50Xi Paslode in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Paslode |
| Model | PPN50Xi |
| Product Type | Pneumatic stapler |
| Staple Type | 16 Gauge wire staples |
| Staple Length | 25 mm – 50 mm |
| Staple Crown Width | 11.2 mm (0.44 inch) |
| Magazine Capacity | 105 staples |
| Operating Pressure | 70 – 120 psi |
| Air Inlet Size | 1/4 inch NPT |
| Dimensions (H × W × L) | 300 × 260 × 85 mm |
| Weight | 1.9 kg |
| Trigger Operation | Sequential and contact actuation |
| Tool-Free Jam Release | Yes |
| Adjustable Exhaust | 360-degree rotating |
| Depth of Drive Adjustment | Tool-free, with indicator scale |
| Insulated Bumper | Reduces recoil and noise |
| Maintenance | Daily lubrication with air tool oil |
| Cleaning | Use dry compressed air, avoid solvents |
| Safety Features | Contact safety trigger prevents accidental firing |
| Spare Parts & Repairability | Replacement parts available from Paslode service centers |
| Compliance | CE certified |
Frequently Asked Questions - PPN50Xi Paslode
How do I load staples into the Paslode PPN50Xi?
Disconnect the air supply and push the magazine latch to open the staple channel. Slide a strip of 16 gauge staples into the magazine with the points facing the workpiece. Close the latch until it clicks securely.
What air pressure should I use for the PPN50Xi?
Operate the stapler between 70 and 120 psi. Always start at the lower pressure and increase gradually until the staple is driven to the desired depth. Do not exceed 120 psi.
How do I clear a jammed staple?
Disconnect the air hose. Use the tool-free jam release mechanism to open the nose area. Remove the bent or stuck staple with pliers if necessary. Inspect the magazine and driver for debris before closing.
Does the PPN50Xi require lubrication?
Yes, add 2 to 3 drops of air tool oil into the air inlet before each use. This keeps the internal piston and O-rings lubricated and prevents wear.
Can I use this stapler to drive nails?
No, the PPN50Xi is designed exclusively for wire staples. Attempting to use nails can damage the driver and magazine.
How do I adjust the depth of drive?
Turn the depth adjustment wheel at the front of the tool. Rotate it clockwise to drive deeper and counterclockwise to drive shallower. Always test on scrap material before work.
Is the Paslode PPN50Xi safe to use on a ladder?
Yes, but always carry it by the handle and never by the air hose. Disconnect the air supply when moving between positions or when the tool is unattended. Follow all ladder safety guidelines.
Why is the stapler not driving staples fully?
Check the air pressure is within 70-120 psi. Also inspect the air hose for kinks or leaks, and ensure the staples are the correct length. If the problem persists, lubricate the tool and clean the exhaust.
Can I use staples from other brands in the PPN50Xi?
Use staples that meet the size specifications: 16 gauge, 50 mm maximum length, 11.2 mm crown. Paslode recommends genuine Paslode staples for consistent performance and to avoid jams.
What maintenance is required after storage?
Before using a stored stapler, clean the magazine and all moving parts with non-flammable cleaner. Re-lubricate the tool thoroughly and test-fire on scrap wood after reconnecting the air supply.
User questions about PPN50Xi Paslode
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Stapler in PDF format for free! Find your manual PPN50Xi - Paslode and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PPN50Xi by Paslode.
USER MANUAL PPN50Xi Paslode
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Paslode
Model : PPN50Xi
Category : Stapler