LFDR1012SB - Washing machine Drean - Free user manual and instructions
Find the device manual for free LFDR1012SB Drean in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Freestanding Front-Load Washing Machine |
| Brand | Drean |
| Model | LFDR1012SB |
| Capacity | 10 kg |
| Maximum Spin Speed | 1200 rpm |
| Dimensions (W x H x D) | 600 x 850 x 600 mm |
| Net Weight | 70 kg |
| Power Supply | 220-240 V, 50 Hz |
| Energy Efficiency Class | A+++ |
| Water Consumption (Cotton 60°C) | 60 L per cycle |
| Energy Consumption (Cotton 60°C) | 1.05 kWh per cycle |
| Wash Programs | 15+ including Cotton, Synthetics, Delicates, Wool, Quick 15, Daily 45, Sports |
| Temperature Range | Cold to 90°C |
| Display | LED Digital Display |
| Delay Start | 1-24 hours |
| Drum Material | Stainless Steel |
| Door Diameter | 35 cm |
| Child Lock | Yes |
| Overflow Protection | Yes |
| Unbalanced Load Detection | Yes |
| Adjustable Feet | Yes |
| Noise Level (Wash/Spin) | 58 dB / 76 dB |
| Installation Type | Freestanding |
| Spare Parts Availability | Available through Drean authorized service centers |
| Repairability Rating | 8/10 |
Frequently Asked Questions - LFDR1012SB Drean
How do I install the washing machine correctly?
Ensure the surface is flat and stable. Use the supplied inlet hose and connect to a cold water tap with pressure between 0.03 and 1 MPa. The drain hose must be placed in a drain standpipe or other suitable outlet. Level the machine by adjusting the feet and lock with the counter-nuts. Finally, plug into a grounded socket. Do not use extension cords.
What should I do if the washing machine won't start?
Check that the door is properly closed, the water supply is open, and the machine is powered. Make sure the program dial is in the correct position and press the Start button. If the child lock is activated, deactivate it first. If still not starting, consult the troubleshooting section of the manual.
How often should I clean the detergent drawer?
We recommend cleaning the detergent drawer every three months. Remove it by pulling outward and press the release clog if present. Rinse with warm water, use a toothbrush for clogged holes. Wipe the drawer compartment and reinsert.
How to clean the drain pump filter?
Unplug the machine and empty the drain hose. Open the lower front panel or cover. Place a tray under the filter assembly. Turn the filter counterclockwise and remove. Clean it from lint and threads, check the impeller for debris. Reinsert the filter and close the panel firmly.
Can I wash a down jacket in the drum?
Yes, but only if the jacket label permits machine washing. Use a delicate program with cold water and low spin speed. Add tennis balls or dryer balls to the drum to maintain loft. Avoid using fabric softener. After washing, dry in the air.
What is the maximum spin speed and what are the benefits of a high spin speed?
The LFDR1012SB has a maximum spin speed of 1200 rpm. Higher spin speeds extract more water, reducing the drying time. For delicate fabrics, reduce the spin speed to 400-800 rpm in the program settings.
How do I use the delayed start function?
Load the laundry, select the program and then press the Delay button to set the desired number of hours (1-24). The display shows the remaining time. Then press Start. The machine will finish after the delay period.
Why does the drum door sometimes open with difficulty?
This is normal if the machine has just finished a wash cycle. The door lock remains engaged until the water temperature drops and the drum stops completely. Wait about 2 minutes. If the door is stuck, turn off the power and wait for the lock release.
What does an error code indicate and how do I respond?
Different codes indicate different issues. E01 typically means a water supply problem. Check if the water tap is closed or the inlet hose kinked. E10 may refer to drainage failure. Clean the filter and check the drain hose. For other codes, refer to the manual or contact Drean service.
How to maintain the rubber door seal to prevent mold?
After each wash, wipe the door seal with a dry cloth to remove moisture and lint. Leave the door ajar to allow ventilation. Use the drum cleaning program monthly with citric acid or a washing machine cleaner to remove low-level impurities.
User questions about LFDR1012SB Drean
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Washing machine in PDF format for free! Find your manual LFDR1012SB - Drean and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LFDR1012SB by Drean.