98912 - Water pump Draper - Free user manual and instructions
Find the device manual for free 98912 Draper in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Submersible clean/dirty water pump |
| Model number | 98912 |
| Brand | Draper |
| Power source | 230V AC, 50Hz |
| Power rating | 750W |
| Max. flow rate | 220 L/min |
| Max. head | 9 m |
| Max. immersion depth | 7 m |
| Outlet diameter | 32 mm (1¼ in) |
| Cable length | 10 m |
| Float switch | Yes, automatic on/off |
| Thermal overload protection | Yes |
| Housing material | High-impact plastic and stainless steel |
| Weight | 5.2 kg |
| Dimensions | 320 x 200 x 270 mm |
| Main functions | Pumping water from wells, tanks, flooded basements, and for garden irrigation |
| Maintenance | Clean the strainer and housing after each use; check for leaks |
| Cleaning instructions | Rinse with fresh water, do not use aggressive solvents |
| Safety features | Suitable for particle sizes up to 25 mm; do not run dry |
| Spare parts | Available from service center; include seals, impeller, float switch |
| Repairability | Designed for easy access to key components; disassembly with standard tools |
| General information | Outdoor use rated IPX8 for submersion |
Frequently Asked Questions - 98912 Draper
What types of liquids can this pump handle?
The Draper 98912 is designed for clean and dirty water with particle sizes up to 25 mm. It is not suitable for flammable, corrosive, or saltwater.
Can the pump run dry?
No, running the pump dry can damage the mechanical seal and impeller. The float switch should be positioned to stop the pump when the water level is too low.
How does the float switch work?
The float switch automatically turns the pump on and off based on the water level. When the water rises, the float lifts and starts the pump; when the water drops, the switch turns it off.
What is the maximum pumping depth and head?
The pump can handle a maximum immersion depth of 7 meters and a maximum discharge head of 9 meters, depending on the flow rate.
How do I connect a discharge hose?
The outlet is 32 mm (1¼ inch) threaded, allowing connection of a compatible hose or pipe. Use PTFE tape on the threads to ensure a watertight seal.
How often should I clean the pump?
Clean the strainer and housing after every use, or more frequently if pumping dirty water. Sediment build-up can cause reduced flow and overheating.
The pump is running but no water is coming out. What should I check?
Check the discharge hose for kinks, the strainer for blockages, and the impeller for debris. Also ensure the pump is fully submerged and the float switch is not stuck.
Is the pump self-priming?
No, submersible pumps are not self-priming. They must be fully submerged for water to be drawn in. Do not run the pump in shallow water.
Can the pump be used during freezing temperatures?
No, any water left in the pump can freeze and crack the housing. Drain and dry the pump thoroughly before storing it in a frost-free area.
Is an RCD required for safe operation?
Yes, always connect the pump to a residual current device (RCD) with a trip current of 30 mA or less to protect against electrical shock.
User questions about 98912 Draper
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water pump in PDF format for free! Find your manual 98912 - Draper and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 98912 by Draper.
USER MANUAL 98912 Draper
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Draper
Model : 98912
Category : Water pump