DigiNet-Stereo - Uncategorized Vocopro - Free user manual and instructions
Find the device manual for free DigiNet-Stereo Vocopro in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Digital Stereo Network Receiver |
| Brand | VocoPro |
| Model | DigiNet-Stereo |
| Primary functions | Network audio streaming, Internet radio, digital-to-analog conversion |
| Connectivity | Ethernet (RJ-45), analog RCA output, digital optical and coaxial outputs |
| Audio formats supported | MP3, WMA, AAC, FLAC, WAV |
| Frequency response | 20 Hz - 20 kHz (±0.5 dB) |
| Signal-to-noise ratio | > 90 dB |
| Output impedance | 470 Ω |
| Power supply | AC 100-240 V, 50/60 Hz |
| Power consumption | 12 W max; < 1 W in standby |
| Dimensions (W x H x D) | 430 x 58 x 250 mm (approximate) |
| Weight | 2.6 kg (approximate) |
| Chassis finish | Brushed aluminum front panel and metal case |
| Included accessories | Remote control, external Wi-Fi antenna, power cord |
| Maintenance | Clean with a soft dry cloth; do not use solvents |
| Safety | CE and FCC certified; short-circuit protection |
| Spare parts availability | Available via authorized service centers |
| Repairability | Modular internal design; firmware update via USB |
| General information | Automatic firmware update notification, backup memory of presets |
Frequently Asked Questions - DigiNet-Stereo Vocopro
How do I connect the DigiNet-Stereo to my network?
Connect the supplied Ethernet cable from the unit's RJ-45 port to your router, or insert the Wi-Fi antenna and use the network setup menu to join your wireless network. Once connected, the device will automatically obtain an IP address.
What audio formats are supported?
The receiver supports MP3, WMA, AAC, FLAC, and WAV files streamed over the network or from attached USB storage.
Can I use it with my existing stereo amplifier?
Yes. Use the RCA analog outputs to connect to any auxiliary input on your amplifier. For a direct digital connection, use the optical or coaxial output to your DAC or digital amplifier.
Does it have Bluetooth connectivity?
No, this model is designed for network streaming (Ethernet/Wi-Fi) and does not include Bluetooth. You can stream from a phone by using a network bridge or via a connected media server.
How do I update the firmware?
Go to the Settings menu and select Firmware Update. The unit can update automatically from the network, or you can download the update file to a USB drive and run the update locally.
Why is sound missing from one channel?
Check the RCA cable and the amplifier input balance. Ensure the source material is stereo and not a mono feed. Try swapping the left/right cables to identify a defective cable or connector.
Can I control it with a smartphone app?
Yes, the DigiNet-Stereo supports the VocoPro NetControl app for basic playback, volume, and preset selection from iOS or Android devices on the same network.
What is the maximum output level?
The analog outputs deliver a maximum of 2 V RMS at 0 dBFS, which is suitable for standard line-level inputs on consumer amplifiers.
Does the remote control require a clear line of sight?
The included remote uses IR, so it must be pointed toward the front panel sensor. The operating range is approximately 7 meters when unobstructed.
How do I reset the unit to factory defaults?
Press and hold the Reset button on the back panel for 5 seconds, or navigate to Settings > System > Factory Reset and confirm. This will erase all presets and network settings.
User questions about DigiNet-Stereo Vocopro
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual DigiNet-Stereo - Vocopro and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DigiNet-Stereo by Vocopro.