VD4-1600-1.2DGW - Heating ElectriQ - Free user manual and instructions
Find the device manual for free VD4-1600-1.2DGW ElectriQ in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Fan heater |
| Brand | ElectriQ |
| Model | VD4-1600-1.2DGW |
| Category | Heating |
| Heating power | 1600 W (two settings: 800/1600 W) |
| Power supply | 220-240 V ~ 50 Hz |
| Heating element type | PTC ceramic heating element |
| Thermostat | Adjustable digital thermostat with frost protection |
| Timer | 24-hour programmable timer |
| Remote control | Included (with battery) |
| Display | Digital LED display |
| Dimensions (W x H x D) | Approx. 220 x 240 x 130 mm |
| Weight | Approx. 1.6 kg |
| Noise level | ≤45 dB |
| Safety features | Overheat protection, tip-over switch, cool-touch housing |
| Cleaning and maintenance | Wipe with a soft dry cloth; do not use water or chemical cleaners |
| Spare parts and repairability | Replaceable fuse, power cord, remote control available from support |
| General information | Portable design with carry handle, suitable for rooms up to 20 m² |
Frequently Asked Questions - VD4-1600-1.2DGW ElectriQ
How do I reset the heater after a safety shutdown?
If the heater shuts down unexpectedly, turn it off and unplug it. Wait for 10 minutes, then plug in and restart. Overheat protection may have been triggered by blocked air outlets.
How do I clean the fan heater?
Always unplug the heater and let it cool before cleaning. Use a soft damp cloth to wipe the exterior. Do not use water or chemical solvents, and avoid getting any moisture into the air vents.
Is the heater suitable for bathroom use?
This model is not designed for bathroom use unless the manual specifies an IPX4 rating. Check the manual for safety zones; we recommend keeping it dry.
How does the digital thermostat work?
The digital thermostat allows you to set a target temperature. The heater switches on and off automatically to maintain that temperature, saving energy.
Can I leave the heater on overnight?
Yes, it is generally safe to operate the heater while sleeping, provided that the heater is in good condition and not covered. However, we recommend using the frost protection mode and never leaving it unattended for long periods.
How do I set the 24-hour timer?
Press the Timer button on the control panel or remote. Use the +/- buttons to choose from 1 to 24 hours. The display will show the countdown.
What is the power consumption on the highest setting?
On the highest setting (1600 W), the heater consumes 1.6 kWh per hour of operation. On low heat (800 W), it consumes 0.8 kWh.
The remote control is not working. What should I do?
Check the batteries in the remote control first. Ensure there is no obstacle between the remote and the heater's IR sensor. If it still fails, pair the remote by pressing 'Reset' on the bottom of the heater.
What is the approximate heating area in square meters?
With 1600 W power output, this heater can comfortably warm a room up to 20 m² (depending on insulation and ceiling height).
Does this heater have an auto-off feature?
Yes, the heater includes an auto-off timer and overheat shutdown. Additionally, the tip-over switch cuts power instantly if the unit is knocked over.
User questions about VD4-1600-1.2DGW ElectriQ
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heating in PDF format for free! Find your manual VD4-1600-1.2DGW - ElectriQ and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VD4-1600-1.2DGW by ElectriQ.
USER MANUAL VD4-1600-1.2DGW ElectriQ
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ElectriQ
Model : VD4-1600-1.2DGW
Category : Heating