C305B-FUN200W - Monitor Sceptre - Free user manual and instructions

Find the device manual for free C305B-FUN200W Sceptre in PDF.

Sceptre
📄 37 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Sceptre C305B-FUN200W - page 4
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Monitor
Brand Sceptre
Model C305B-FUN200W
Screen Size 30 inches (curved)
Resolution 2560 x 1080 (Full HD UltraWide)
Refresh Rate 200Hz
Aspect Ratio 21:9
Panel Type VA with 1500R curvature
Brightness 300 cd/m²
Contrast Ratio 3000:1
Viewing Angles 178° horizontal / 178° vertical
Response Time 1ms MPRT
Connectivity 2x HDMI 2.0, 2x DisplayPort 1.2, Audio Out
Built-in Speakers Yes, 5W x 2
VESA Mounting 100mm x 100mm
Power Consumption 45W (typical), <0.5W standby
Weight 8.5 kg (with stand)
Dimensions (with stand) 700mm x 470mm x 240mm
Included Accessories Power cable, HDMI cable, DisplayPort cable, user manual
Care and Cleaning Use a soft microfibre cloth with mild cleaner; avoid solvents
Safety Features Anti-flicker, low blue light, Kensington lock
Repairability No user-serviceable parts; contact Sceptre support

Frequently Asked Questions - C305B-FUN200W Sceptre

How do I connect the Sceptre C305B-FUN200W to my PC?
Use an HDMI or DisplayPort cable. Connect one end to the monitor and the other to your graphics card or laptop. Switch the input source via the OSD menu if necessary.
How can I enable 200Hz refresh rate?
Navigate to your operating system's display settings, select 2560 x 1080 resolution and choose 200Hz. Ensure you use a DisplayPort or HDMI 2.0 cable that supports the bandwidth.
Does this monitor support AMD FreeSync?
Yes, the monitor supports FreeSync. Enable it in the OSD menu under Game Mode to reduce screen tearing during gaming.
What should I do if there is no signal on the screen?
Check that the video cable is securely connected. Use the OSD to select the correct input source (HDMI or DisplayPort). Also verify that the computer is in a supported resolution.
How do I clean the curved 30-inch screen?
Power off the monitor and wipe gently with a dry microfibre cloth. For stubborn spots, lightly dampen the cloth with water; do not spray liquids directly and avoid harsh chemicals.
Are the built-in speakers good? How to use them?
The monitor has two 5W speakers. Connect an audio source via HDMI or DisplayPort and set your device's audio output to Monitor in sound settings. Adjust volume via the OSD.
Can I wall-mount this Sceptre monitor?
Yes, it is VESA-compatible with 100x100mm mounting holes. Use a compatible bracket and the included screws.
What is the native resolution for this 30-inch curved monitor?
The native resolution is 2560 x 1080, which provides an ultra-wide 21:9 picture. Always set this to get the sharpest image.
Does the C305B-FUN200W include a blue light filter?
Yes, it has a Blue Light Filter feature. You can enable it in the OSD menu under Picture settings to reduce eye strain during long sessions.
How do I reset the monitor settings to factory defaults?
Open the OSD menu, go to Setup or Others, and select Factory Reset. This restores all settings to their original state.

User questions about C305B-FUN200W Sceptre

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

Your email remains private: it is only used to notify you if someone answers your question.

No questions yet. Be the first to ask one.

Download the instructions for your Monitor in PDF format for free! Find your manual C305B-FUN200W - Sceptre and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. C305B-FUN200W by Sceptre.

USER MANUAL C305B-FUN200W Sceptre

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Sceptre

Model : C305B-FUN200W

Category : Monitor