Nyquist NQ-GA10PV - Uncategorized Bogen - Free user manual and instructions
Find the device manual for free Nyquist NQ-GA10PV Bogen in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | VoIP Paging Amplifier |
| Brand | Bogen |
| Model | Nyquist NQ-GA10PV |
| Output Power | 10 W RMS |
| Line Outputs | 25V/70V speaker lines or 4Ω direct |
| Power Supply | Power over Ethernet (PoE), IEEE 802.3af |
| Power Consumption | 15 W max (PoE powered) |
| Network Interface | 10/100 Mbps Ethernet with SIP 2.0 |
| SIP Compatibility | Works with IP-PBX systems like Asterisk, Cisco, Avaya |
| Configuration | Web-based interface and SNMP monitoring |
| Audio Input | Balanced mic/line input (600Ω) |
| Frequency Response | 100 Hz - 15 kHz (±3 dB) |
| Mounting | Wall mountable with included bracket |
| Dimensions (L x H x W) | 108 x 108 x 38 mm |
| Weight | 0.5 kg (1.1 lb) |
| Operating Temperature | 0°C to 40°C |
| Safety | Indoor use only; connect to PoE source only |
| Maintenance | Wipe with dry cloth; keep ventilation clear |
| Protection | Overload, short-circuit, thermal protection |
| Repairability | No user-serviceable parts; authorized Bogen service required |
| Warranty | 2-year limited warranty |
Frequently Asked Questions - Nyquist NQ-GA10PV Bogen
What is the Bogen Nyquist NQ-GA10PV used for?
The NQ-GA10PV is a VoIP paging amplifier used for commercial paging and public address systems. It connects to an IP network and delivers clear audio to speaker zones via SIP paging calls.
How do I connect the NQ-GA10PV to my network?
Connect an Ethernet cable to a PoE-enabled switch or PoE injector. The unit will obtain an IP address via DHCP. Access the web interface using a browser to configure network and audio settings.
Does the NQ-GA10PV support Power over Ethernet?
Yes, it supports IEEE 802.3af PoE. A single Ethernet cable carries both data and power, simplifying installation and eliminating the need for a separate outlet.
Can I use the built-in web interface to configure paging zones?
Yes, the device includes a built-in web server that allows configuration of paging zones, SIP registration, and audio levels. It also supports SNMP for network monitoring.
How many watts does the built-in amplifier deliver?
The amplifier provides 10 watts RMS. This is ideal for small to medium paging zones using 25V/70V speakers or a 4Ω speaker.
What type of speakers can be connected?
You can connect speakers rated for 25V, 70V, or 4Ω low-impedance systems. Verify that the total connected load does not exceed 10 watts to avoid overloading.
How do I reset the device to factory defaults?
Locate the reset button on the rear panel. Press and hold it for 10 seconds until the status LEDs blink. The device will restart with default settings.
Is the NQ-GA10PV compatible with standard SIP VoIP systems?
Yes, it supports SIP 2.0 and is compatible with leading IP-PBX platforms like Asterisk, Cisco, Avaya, and others. You can register it as a standard SIP endpoint.
Can I daisy-chain multiple Nyquist units?
Multiple NQ-GA10PV units can be distributed across the network and configured as a paging group. Each unit needs its own Ethernet/PoE connection and unique SIP extension.
What maintenance is required for the NQ-GA10PV?
Regularly clean the enclosure with a dry, soft cloth and ensure ventilation openings remain unobstructed. There are no user-serviceable parts; for internal repairs, contact Bogen technical support.
User questions about Nyquist NQ-GA10PV Bogen
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual Nyquist NQ-GA10PV - Bogen and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Nyquist NQ-GA10PV by Bogen.