Q100M V2 - Computer Cooling Component PCCOOLER - Free user manual and instructions
Find the device manual for free Q100M V2 PCCOOLER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | CPU Cooling Fan and Heatsink |
| Brand | PCCOOLER |
| Model | Q100M V2 |
| Compatible Sockets | Intel LGA115x, LGA1200; AMD AM4 |
| Bearing Type | Hydraulic Bearing |
| Fan Speed | 800-1800 RPM (PWM) |
| Airflow | 62 CFM |
| Noise Level | 18-28 dBA |
| Voltage | 12V DC |
| Rated Current | 0.25A |
| Power Consumption | 3W |
| Connector | 4-pin PWM |
| Heatsink Material | Aluminum Fins with Copper Heat Pipes |
| Number of Heat Pipes | 4 x 6mm |
| Dimensions (L x W x H) | 130 x 75 x 155 mm |
| Weight | 520 g |
| Mounting System | Screw and Clip for Easy Installation |
| Lighting | None (Non-RGB Design) |
| Maintenance | Clean dust with compressed air |
| Safety Features | Overcurrent and Reverse Polarity Protection |
| Repairability | Replaceable Fan and Mounting Kit |
| General Information | Quiet, efficient cooling for mainstream CPUs |
Frequently Asked Questions - Q100M V2 PCCOOLER
What CPU sockets are compatible with the PCCOOLER Q100M V2?
The Q100M V2 supports Intel LGA115x, LGA1200 and AMD AM4 sockets. Always check your motherboard's socket type before installation.
How do I install the Q100M V2 on my motherboard?
First, apply a small amount of thermal paste to the CPU. Align the mounting brackets with the socket holes, then screw the cooler down evenly. Finally, connect the 4-pin PWM fan connector to the CPU_FAN header on your motherboard.
Does the Q100M V2 support PWM fan control?
Yes, the fan uses a 4-pin PWM connector, allowing the motherboard to dynamically adjust fan speed based on CPU temperature for quiet and efficient cooling.
How do I clean the heatsink and fan?
To maintain performance, clean the heatsink and fan every 3-6 months. Use a can of compressed air to blow dust from the fins and fan blades. Avoid using water or solvents.
Is the fan replaceable if it fails?
Yes, the fan is replaceable. You can purchase a standard 120mm PWM fan and mount it to the heatsink using the original clips. Ensure the replacement fan has similar specifications.
What thermal paste should I use with the Q100M V2?
The cooler comes with pre-applied thermal paste on the base. If you need to reapply, use a high-quality non-conductive thermal paste like Arctic MX-4 or Noctua NT-H1.
How loud is the Q100M V2 during operation?
At maximum speed (1800 RPM), the noise level is around 28 dBA, which is relatively quiet. At lower speeds, it is nearly silent with 18 dBA noise output.
Does the Q100M V2 have RGB lighting?
No, the Q100M V2 is a non-RGB cooler. It focuses on performance and low noise without lighting features.
What is the maximum TDP the Q100M V2 can handle?
The cooler is designed for entry-level to mid-range CPUs with a TDP of up to 130W. It is suitable for most mainstream processors without heavy overclocking.
Is the Q100M V2 compatible with AMD AM5 sockets?
No, the included mounting kit is specifically for AM4 and may not fit AM5 without an additional mounting bracket. Check compatibility with your motherboard before purchasing.
User questions about Q100M V2 PCCOOLER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Computer Cooling Component in PDF format for free! Find your manual Q100M V2 - PCCOOLER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Q100M V2 by PCCOOLER.
USER MANUAL Q100M V2 PCCOOLER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PCCOOLER
Model : Q100M V2
Category : Computer Cooling Component