K2020A+ - Receiver Kinter - Free user manual and instructions
Find the device manual for free K2020A+ Kinter in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Stereo Receiver / Amplifier |
| Brand | Kinter |
| Model | K2020A+ |
| Channels | 2 (Stereo) |
| Peak Power Output | 100W x 2 |
| Speaker Impedance | 4 - 16 Ohm |
| Bluetooth Version | 4.2 |
| Input Sources | Bluetooth, AUX, USB, SD, FM |
| Supported Audio Formats | MP3, WMA, WAV |
| FM Radio Range | 87.5 - 108 MHz |
| Display | LED digital display |
| Remote Control | Included (IR) |
| Power Supply | AC 110-240V 50/60Hz |
| Dimensions (W x D x H) | 20 cm x 15 cm x 6 cm |
| Weight | 1.2 kg |
| Enclosure Material | Aluminum alloy and ABS plastic |
| Tone Controls | Bass and treble knobs |
| Protection Circuits | Overload, short circuit and overheat |
| Cleaning Instructions | Wipe with a soft dry cloth |
| Replacement Parts | Available via authorized service centers |
Frequently Asked Questions - K2020A+ Kinter
How do I connect my smartphone via Bluetooth?
Turn on the receiver and press the mode button until the display shows Bluetooth. Enable Bluetooth on your phone and select K2020A+ from the list. Pair if prompted, and audio will stream automatically.
How can I adjust the bass and treble?
Use the BASS and TREBLE knobs on the front panel to shape the sound. Rotate clockwise to increase, counterclockwise to decrease. Set them to 12 o'clock for neutral response.
Does the receiver play music from a USB drive?
Yes, insert a USB drive with MP3, WMA, or WAV files into the USB port. Press the mode button to select USB mode. Navigation of tracks is available via the remote control.
How do I set up the FM radio?
Connect the included FM antenna to the antenna jack. Press the mode button to switch to FM mode. Use the scan button to search for stations, or tune manually with the seek controls.
What should I do if there is no sound?
Check that the receiver is in the correct input mode and the volume is not at minimum. Verify speaker connections are secure and the speaker wires are not shorted. Also confirm the mute function is off.
Can I use outdoor speakers with this receiver?
Yes, as long as the speaker impedance is between 4 and 16 ohms and the total power handling exceeds the receiver's output. For outdoor use, ensure proper weatherproofing of connections.
How to clean and maintain the receiver?
Disconnect power before cleaning. Wipe the exterior with a soft dry cloth. Do not use abrasive cleaners or liquids. Keep ventilation openings clear of dust.
Is there a remote control included?
Yes, the K2020A+ comes with a full-function remote control. Insert two AAA batteries (not included) and point it at the front panel's IR receiver.
What are the power requirements?
The receiver operates on AC 110-240V, 50/60Hz. This wide range allows use in most countries. The included power cord fits standard outlets.
Is the K2020A+ repair friendly?
The device is designed for professional servicing. Do not open it yourself as high voltages may be present. Contact authorized Kinter service centers for repair or spare parts.
User questions about K2020A+ Kinter
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual K2020A+ - Kinter and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. K2020A+ by Kinter.
USER MANUAL K2020A+ Kinter
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Kinter
Model : K2020A+
Category : Receiver