RWM-4US - Microphone Rockville - Free user manual and instructions
Find the device manual for free RWM-4US Rockville in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 4-Channel UHF Wireless Microphone System |
| Number of Channels | 4 independent channels |
| Microphone Type | Handheld dynamic microphone (x4) |
| Frequency Range | UHF 600-900 MHz (selectable) |
| Transmission Type | Wireless UHF |
| Modulation | FM |
| Receiver Type | Quad receiver with PLL synthesized tuning |
| Audio Output | Balanced XLR and 1/4" outputs |
| Power Supply Receiver | AC 100-240V 50/60Hz adapter included |
| Power Supply Transmitters | 2 x AA batteries per microphone (not included) |
| Battery Life | Approx. 8-10 hours continuous use |
| Operating Range | Up to 50 meters (typical) |
| Receiver Dimensions | 420 x 180 x 45 mm |
| Receiver Weight | 1.8 kg |
| Microphone Dimensions | 250 x 50 mm (each) |
| Microphone Weight | 300 g (each) |
| Display | LCD display with channel and battery status |
| Controls | Individual volume control per channel, IR sync, frequency select |
| Antennas | 2 external detachable antennas |
| Cleaning and Maintenance | Wipe with a soft, dry cloth; avoid solvents |
| Safety Warnings | Keep away from water and moisture; do not disassemble |
| Spare Parts | Replacement microphones, antennas, and power adapters available |
| What's in the Box | 4 handheld microphones, 1 receiver, 2 antennas, power adapter, audio cables, user manual |
Frequently Asked Questions - RWM-4US Rockville
How do I set up the Rockville RWM-4US wireless microphone system?
Connect the antennas to the receiver, plug in the AC adapter, and connect the audio outputs to your mixer or amplifier. Install two AA batteries in each handheld microphone, power on the receiver, then turn on the microphones. The system will automatically connect if the frequencies match. If not, use the IR sync function to quickly pair.
How do I change the frequency on the receiver?
Press the SET button to enter frequency selection mode. Use the + and - buttons to scroll through the available UHF frequencies. Press SET to confirm. The selected frequency is shown on the LCD display. Repeat for each channel.
How do I pair a handheld microphone with the receiver?
Place the microphone's IR sensor window close to the receiver's IR port. Press the IR SYNC button on the receiver. The receiver will send the current channel frequency to the microphone, and they will automatically sync. A confirmation appears on the display.
What type of batteries does the handheld microphone use?
Each handheld microphone requires two AA batteries. We recommend alkaline or rechargeable AA batteries for best performance. The battery status is shown on the LCD display of the receiver.
Why is there no sound coming from the microphone?
Check that the microphone is powered on and the batteries are installed correctly. Ensure the receiver is on and the volume for that channel is not turned down. Verify that the microphone and receiver are on the same frequency. Also, check that the audio cables are connected properly to the mixing console or amplifier.
Can I use more than 4 microphones with this system?
The RWM-4US supports exactly 4 wireless microphones simultaneously. To use additional microphones, you would need another receiver unit and ensure the frequencies do not interfere.
How do I clean and maintain the microphones?
Use a soft, dry cloth to wipe the microphone body and grille. For the grille, you can unscrew it and brush off any debris. Do not use abrasive cleaners or submerge the microphone in water. Keep the units in a dry, dust-free environment when not in use.
What is the operating range of the wireless system?
The system has an effective operating range of up to 50 meters (150 feet) in open air. Walls and obstacles can reduce the range. For best results, maintain a clear line of sight between the receiver and microphone.
Does the system include a power supply?
Yes, the package includes a 100-240V AC adapter for the receiver. The handheld microphones require AA batteries, which are not included.
How do I install the antennas?
Screw the two antennas onto the antenna connectors on the back panel of the receiver. Position the antennas vertically and keep them at least 1 meter away from metal surfaces to avoid interference. For best reception, place the receiver at a higher position if possible.
User questions about RWM-4US Rockville
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Microphone in PDF format for free! Find your manual RWM-4US - Rockville and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RWM-4US by Rockville.
USER MANUAL RWM-4US Rockville
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Rockville
Model : RWM-4US
Category : Microphone