Lemokey G1 - Mouse Keychron - Free user manual and instructions
Find the device manual for free Lemokey G1 Keychron in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Wireless gaming mouse |
| Brand | Keychron / Lemokey |
| Model | Lemokey G1 |
| Dimensions | 125 × 65 × 40 mm |
| Weight | 70 g |
| Connectivity | 2.4 GHz wireless, Bluetooth 5.1, USB-C wired |
| Sensor | Optical sensor, up to 26,000 DPI |
| Polling rate | 1000 Hz (1 ms response) |
| Programmable buttons | 6 buttons |
| Switch rating | 80 million clicks |
| Battery capacity | 700 mAh |
| Charging interface | USB-C |
| RGB lighting | Customizable RGB |
| Software | Lemokey configuration software |
| Ergonomics | Ambidextrous symmetrical shape |
| Glide feet | PTFE mouse feet |
| Cable | Detachable paracord cable |
| Maintenance | Wipe with soft dry cloth |
| Safety | Avoid water and highly humid environments |
| Repairability | Replacement switches and feet |
Frequently Asked Questions - Lemokey G1 Keychron
How do I connect the Lemokey G1 to my computer?
You can connect via 2.4 GHz wireless using the included USB receiver, via Bluetooth 5.1, or directly with the USB-C cable. To switch modes, use the mode switch slider on the bottom of the mouse.
What is the battery life of the Lemokey G1?
With a 700 mAh battery, the mouse can last up to 80 hours with RGB lighting off, and about 40 hours with RGB on, depending on usage and polling rate settings.
How do I charge the mouse?
Use the provided USB-C cable to connect the mouse to a powered USB port. A full charge takes approximately 2 hours. The indicator LED will show charging status.
Can I customize the RGB lighting and button assignments?
Yes, download the Lemokey configuration software to adjust RGB effects, DPI settings, polling rate, and remap all buttons. The mouse also has on-board memory to save profiles.
Is the Lemokey G1 suitable for left-handed users?
The mouse features an ambidextrous symmetrical shape with side buttons on both sides, making it comfortable for both left-handed and right-handed users. The side buttons can be remapped or disabled in software.
How do I clean the Lemokey G1 mouse?
Use a soft, dry cloth to wipe the exterior. For the sensor, gently remove dust with a cotton swab. Avoid using liquids or abrasive cleaners, and disinfecting wipes may damage the coating.
What is the DPI range and how do I change it?
The sensor supports DPI from 100 to 26,000 in adjustable increments. Press the DPI button on the top to cycle through preset values, or set custom DPI steps in the configuration software.
Does the mouse support wireless charging?
No, the Lemokey G1 only supports wired charging via USB-C. It does not support Qi wireless charging.
Are replacement parts available for the Lemokey G1?
Keychron offers replacement switches, mouse feet, and cables for the Lemokey G1. The switches are hot-swappable, allowing you to change them without soldering for easier repair and customization.
How do I update the firmware?
Download the latest firmware updater from the official website. Connect the mouse via wired mode, close all other software, and run the updater. Follow the on-screen instructions; do not disconnect the mouse during the process.
User questions about Lemokey G1 Keychron
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Mouse in PDF format for free! Find your manual Lemokey G1 - Keychron and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Lemokey G1 by Keychron.
USER MANUAL Lemokey G1 Keychron
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Keychron
Model : Lemokey G1
Category : Mouse