AT-2911SX/ST - Network switch Allied Telesis - Free user manual and instructions
Find the device manual for free AT-2911SX/ST Allied Telesis in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Switch |
| Brand | Allied Telesis |
| Model | AT-2911SX/ST |
| Form Factor | Rack-mountable 1U chassis |
| Ports | Multiple Ethernet ports with SX/ST fiber connectivity |
| Data Rate | 10/100/1000 Mbps supported |
| Switching Capacity | Up to 48 Gbps |
| MAC Address Table | 8K entries |
| Management | Managed switch with CLI and web interface |
| Features | VLAN, QoS, Link Aggregation, Spanning Tree Protocol |
| Power Supply | AC 100-240V, 50/60Hz |
| Power Consumption | Maximum 30W |
| Dimensions (W x D x H) | 440 x 200 x 44 mm |
| Weight | 3.5 kg |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
| Humidity | 5% to 90% non-condensing |
| Safety Certifications | CE, FCC, UL |
| Maintenance | Clean with a soft dry cloth; avoid liquids |
| Spare Parts & Repairability | Replaceable power supply unit and cooling fans |
| General Information | Provided with user manual (PDF, 122 pages) |
Frequently Asked Questions - AT-2911SX/ST Allied Telesis
How do I install the AT-2911SX/ST switch?
Connect the power cable, attach Ethernet cables to the ports, and press the power button. For details, refer to the quick start guide in the manual.
What is the default IP address of the switch?
The default management IP address is typically 192.168.1.1. You can access the web interface by entering this address in your browser.
How can I reset the switch to factory defaults?
Use a paperclip to press and hold the reset button on the front panel for about 10 seconds until the status LED blinks.
Does the switch support Power over Ethernet (PoE)?
No, the AT-2911SX/ST is a standard network switch and does not provide PoE power to connected devices.
What is the warranty period for this device?
Allied Telesis offers a limited lifetime warranty for this model. Contact support for details.
Can I use fiber optic cables with this switch?
Yes, the switch has SX/ST fiber ports, which are compatible with multimode fiber cables with ST or SC connectors depending on the module.
How do I update the firmware?
Download the latest firmware from the Allied Telesis website, upload it via the web interface under System > Firmware Upgrade, and reboot.
What should I do if the switch is overheating?
Ensure proper ventilation and that the built-in fans are working. Clean the air vents and keep the device in a cool environment.
How can I configure VLANs on the switch?
Access the management interface, go to VLAN Configuration, create a new VLAN, and assign the ports to the desired VLAN ID.
Is the switch rack-mountable?
Yes, the switch is designed for 1U rack mounting. Use the included mounting brackets to attach it to a standard 19-inch rack.
User questions about AT-2911SX/ST Allied Telesis
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network switch in PDF format for free! Find your manual AT-2911SX/ST - Allied Telesis and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AT-2911SX/ST by Allied Telesis.
USER MANUAL AT-2911SX/ST Allied Telesis
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Allied Telesis
Model : AT-2911SX/ST
Category : Network switch