CSE-M35TQB - PC Case Supermicro - Free user manual and instructions
Find the device manual for free CSE-M35TQB Supermicro in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Internal 5-bay 3.5" hot-swap drive cage |
| Brand | Supermicro |
| Model | CSE-M35TQB |
| Form Factor | Fits into a standard 5.25" external drive bay |
| Drive Bays | 5x 3.5" SAS/SATA hot-swappable drive slots |
| Backplane | Single backplane with SATA connectors for each drive |
| Interface | Supports SATA and SAS (with compatible controllers) |
| Cooling | 2x 80mm cooling fans at the rear (sold separately in some models) |
| Dimensions | 146mm x 146mm x 206mm (5.75" x 5.75" x 8.1") |
| Weight | Approximately 1.6 kg (3.5 lbs) |
| Power Supply | Drives powered via SATA power connectors; fans require a 4-pin molex or 3-pin fan header |
| LED Indicators | Per-drive power and activity LEDs on the front panel |
| Hot-swap Capability | Yes, drives can be replaced without powering down the system |
| Drive Trays | Tool-less, locking drive trays included |
| Construction | Aluminum and steel frame for durability and heat dissipation |
| Maintenance and Cleaning | Use compressed air to remove dust; wipe exterior with a dry cloth; avoid liquid cleaners |
| Safety | Handle drives with care; ensure proper grounding before touching components |
| Repairability | Replacement drive trays, fans and brackets are available from Supermicro |
| Compatibility | Works with most ATX cases that have an available 5.25" bay |
Frequently Asked Questions - CSE-M35TQB Supermicro
How do I install the CSE-M35TQB in my computer case?
To install the CSE-M35TQB, first ensure your case has an empty 5.25" external drive bay. Slide the drive cage into the bay from the front, aligning the screw holes with the case. Secure it with the provided screws. Connect the SATA cables from the backplane to your motherboard or controller, and connect the SATA power connectors to the power supply. Finally, install the fans and connect them to a fan header.
What is the maximum drive capacity?
The CSE-M35TQB supports five 3.5" SAS or SATA drives. There is no specific capacity limit imposed by the cage itself; the maximum capacity depends on the size of the drives you use (e.g., 2TB, 4TB, 12TB, etc.). Always check your controller's compatibility.
Does it support SAS drives?
Yes, the backplane is compatible with both SATA and SAS drives when paired with a suitable SAS controller. SATA drives will work with any SATA connector, but SAS drives require a SAS-enabled host bus adapter (HBA) or RAID card.
How do I hot-swap a drive?
To hot-swap, first ensure the new drive is compatible with your system. Unlock the drive tray using the key/latch, pull the tray handle to release the drive, and slide it out. Insert the new drive into the tray, lock it, and slide it back into the bay. The LED indicator will show activity as the system recognizes the drive.
What do the LED indicators on the front panel mean?
Each drive slot has two LEDs: one for power (green) and one for activity (blinking). A steady green light indicates the drive is powered on, and activity LED blinks during read/write operations. Refer to your system's manual for exact behavior.
Can I replace the fans with higher-performance models?
Yes, the fans are standard 80mm units that can be replaced. Be sure to use fans with similar voltage and connector types (e.g., 3-pin or 4-pin). Upgrading to higher airflow fans may increase noise but improve cooling.
Is the CSE-M35TQB compatible with my motherboard?
The CSE-M35TQB connects via standard SATA ports on any motherboard. It does not require specialized software or firmware. Ensure your motherboard has enough SATA ports for five drives and enough SATA power connectors from the power supply.
How do I clean the drive cage and fans?
Power down the system first. Use compressed air to blow dust from the fans, backplane, and drive bay areas. For the exterior, wipe with a soft slightly damp cloth. Avoid using vacuum cleaners or liquid sprays directly on components.
What is the warranty and where can I get replacement parts?
Supermicro offers a limited warranty for this product, typically 1-3 years. Replacement parts such as drive trays, fans, and brackets can be ordered from Supermicro's official website or authorized distributors. Keep the serial number for support.
Can the drive cage be mounted in a chassis that lacks a 5.25" bay?
This unit is specifically designed for a 5.25" bay. If your chassis has no 5.25" bay, you may need an adapter bracket. Some users install it in a drive cage using creative mounting, but that requires modification and is not recommended by Supermicro.
User questions about CSE-M35TQB Supermicro
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your PC Case in PDF format for free! Find your manual CSE-M35TQB - Supermicro and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CSE-M35TQB by Supermicro.
USER MANUAL CSE-M35TQB Supermicro
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Supermicro
Model : CSE-M35TQB
Category : PC Case