KNV Dot - Uncategorized GLP - Free user manual and instructions
Find the device manual for free KNV Dot GLP in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Professional LED lighting fixture |
| Brand | GLP |
| Model | KNV Dot |
| Light Source | High-power RGB LED |
| Color Mixing | Smooth RGB 16-bit color mixing |
| Control Protocol | DMX512 via 3-pin XLR |
| Operating Modes | DMX, master/slave, standalone |
| Beam Angle | 120 degrees |
| Power Supply | 100-240V AC, 50/60Hz |
| Power Consumption | 60W |
| Dimensions (LxWxH) | 140 x 140 x 160 mm |
| Weight | 1.5 kg |
| Housing | Aluminum, black finish |
| Mounting | Floor or truss mount via adjustable bracket |
| Cooling | Convection, silent operation |
| IP Rating | IP20 (indoor use only) |
| Operating Temperature | 0°C to 40°C |
| Connectivity | PowerCON in/out, XLR 3-pin in/out |
| Display | OLED display for menu navigation |
| Maintenance | Clean with dry cloth, avoid solvents |
| Safety | CE certified, complies with European standards |
| Repairability | Modular components, replaceable LED module |
| General Information | User manual included (67 pages PDF format) |
Frequently Asked Questions - KNV Dot GLP
How do I connect the KNV Dot to a DMX controller?
Connect a DMX cable from the controller's DMX output to the DMX input on the fixture. Use a standard 3-pin XLR cable. Terminate the chain by connecting a 120Ω resistor between the DMX data lines on the last fixture.
What is the DMX channel count?
The KNV Dot uses 5 DMX channels for full RGB control: red, green, blue, master dimmer, and strobe. Some modes allow reduced channel counts for simpler setups.
How do I set the DMX address?
Use the OLED display and menu buttons to enter the Setup menu. Navigate to 'DMX Address' and adjust the value using the up/down buttons. The fixture will merge into your DMX universe starting at that address.
Can I operate the KNV Dot without a DMX controller?
Yes, the KNV Dot has a standalone mode with built-in color macros and auto-program sequences. You can also set it to master/slave mode to sync multiple units without a controller.
How do I perform a factory reset?
Go to the Menu, select 'System', then 'Factory Reset'. Confirm the action when prompted. This restores all settings to default values and clears any custom DMX addressing or operating modes.
What is the recommended cleaning procedure?
Unplug the fixture before cleaning. Use a soft, dry cloth to gently wipe the housing and lens. Avoid using water, solvents, or abrasive cleaners, as they can damage the surface and optics.
Can the KNV Dot be used outdoors?
No, the KNV Dot has an IP20 rating, meaning it is only protected against solid objects and not water. It should be used indoors or in a weatherproof enclosure if temporary outdoor use is required.
What is the maximum number of units on one DMX daisy chain?
With proper DMX cabling and termination, you can daisy-chain up to 32 fixtures on a single DMX line. For larger installations, use a DMX splitter to maintain signal integrity.
Does the KNV Dot support RDM (Remote Device Management)?
Yes, the KNV Dot supports RDM over DMX, allowing you to remotely address and monitor the fixture from compatible console software. Enable RDM in the system menu for this functionality.
What should I do if the fixture does not power on?
First, check that the power cable is securely connected to both the fixture and the mains outlet. Verify the outlet is active. If using multiple fixtures, check the PowerCON connections. If it still won't power on, inspect the internal fuse and replace it with the same type if blown. If the issue persists, contact a qualified technician.
User questions about KNV Dot GLP
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual KNV Dot - GLP and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KNV Dot by GLP.
USER MANUAL KNV Dot GLP
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : GLP
Model : KNV Dot
Category : Uncategorized