Buddylight CA1010 - Lighting Claypaky - Free user manual and instructions
Find the device manual for free Buddylight CA1010 Claypaky in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Claypaky |
| Model | Buddylight CA1010 |
| Product type | Professional LED profile spotlight |
| Light source | 7 x 40 W RGBW LEDs |
| Color mixing | RGBW system with 16-bit fine control |
| Beam angle | 4.5 to 50 degrees motorized zoom |
| Dimming | 0 to 100 percent with linear and smooth modes |
| Strobe | 0 to 25 Hz with variable speed |
| Control protocols | DMX512 and RDM |
| DMX channels | 14, 18 or 21 depending on operating mode |
| Display | OLED screen with jog wheel navigation |
| Connectors | 5-pin XLR DMX input and output, Neutrik powerCON power input |
| Power supply | 100 to 240 V AC, 50/60 Hz, autoswitching |
| Max power consumption | 350 W |
| Housing | Die-cast aluminum with steel covers |
| Cooling | Variable-speed low-noise fans and heat sinks |
| Mounting | Two omega brackets for rigging or floor mounting |
| Dimensions | 418 x 275 x 280 mm |
| Weight | 18.0 kg |
| Protection rating | IP20 |
| Safety | Auto-switching power supply, thermal overload protection, safety cable point |
| Maintenance | Clean lenses and fan filters with dry cloth after disconnecting power |
| Spare parts | Available through Claypaky authorized technical service |
| General information | 44-page user manual available as free PDF download |
Frequently Asked Questions - Buddylight CA1010 Claypaky
How do I set the DMX address on Buddylight CA1010?
Use the OLED display and jog wheel: press Menu, select DMX Address, rotate to choose the desired address and confirm with Enter. Multiple units can be daisy-chained through the 5-pin XLR connections.
What is the recommended cleaning procedure?
Disconnect the fixture from power and wait for it to cool. Clean the lenses and fan filters with a soft dry cloth. Do not use solvents because they may damage the optical coating.
Can this fixture be used outdoors?
The housing is rated IP20, so it is intended for indoor use only. For outdoor applications a weather-protected enclosure is required.
What power source does the Buddylight CA1010 require?
It features an autoswitching power supply for 100-240 V AC, 50/60 Hz. The maximum power consumption is 350 W.
How do I update the firmware?
Firmware updates are performed through the DMX input using the manufacturer's dedicated software and a USB-DMX interface. Check the Claypaky website for the latest release.
What are the available DMX operating modes?
The fixture offers 14-channel, 18-channel and 21-channel modes. Select the mode that matches the capabilities of your lighting console.
What is the maximum ambient operating temperature?
The recommended ambient temperature range is -10 to +45 degrees Celsius. Avoid continuous operation above this limit to prevent overheating.
Can I replace the LED module myself?
The LED module is not user serviceable. Contact Claypaky authorized service for spare parts and repair, because alignment and thermal compound application require specialist equipment.
How can I reset the fixture?
Go to the OLED menu, select Fixture Reset or Factory Default and confirm. This restores all parameters to their default values.
What accessories are included in the box?
The package includes the Buddylight CA1010 with its power cable, a 5-pin XLR DMX cable, two omega clamp brackets and the user manual.
User questions about Buddylight CA1010 Claypaky
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual Buddylight CA1010 - Claypaky and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Buddylight CA1010 by Claypaky.