A412MWS - Microphone SHURE - Free user manual and instructions
Find the device manual for free A412MWS SHURE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Shure |
| Model | A412MWS |
| Product Type | Microphone |
| Transducer Type | Dynamic |
| Polar Pattern | Cardioid |
| Frequency Response | 50 Hz - 15 kHz |
| Sensitivity | -54 dBV/Pa |
| Impedance | 300 ohms |
| Connector Type | XLR 3-pin |
| Power Requirement | None (passive) |
| Dimensions | 180 mm x 50 mm (approx.) |
| Weight | 300 g (approx.) |
| Housing Material | Metal |
| Finish | Satin black |
| Mounting | Stand adapter included |
| Included Accessories | Microphone, stand adapter, storage pouch |
| Maintenance | Wipe with dry cloth; avoid moisture |
| Safety | Keep away from liquids and extreme temperatures |
| Spare Parts | Grille, cartridge, connector available |
| Repairability | Repairable by qualified technician |
Frequently Asked Questions - A412MWS SHURE
How do I connect the Shure A412MWS microphone to my audio interface?
Connect the XLR cable to the microphone's 3-pin connector and plug the other end into a compatible XLR input on your audio interface. Make sure the interface provides enough gain for the dynamic capsule.
Does the A412MWS require phantom power?
No, the A412MWS is a dynamic microphone and works without phantom power. It can be connected directly to mixers, interfaces, or PA systems with standard XLR inputs.
What polar pattern does the A412MWS use, and when should I use it?
It uses a cardioid polar pattern, which picks up sound mainly from the front and rejects noise from the sides and rear. This is ideal for live vocals and studio recording in noisy environments.
How can I reduce background noise when recording?
Position the microphone close to the sound source and speak/sing directly into the front of the capsule. Use the cardioid pattern to minimise off-axis noise, and consider adding a pop filter to reduce plosives.
How do I clean and maintain the A412MWS microphone?
Use a soft dry cloth to wipe the body and grille. Do not use solvents or submerge the microphone in water. If dust accumulates on the grille, use a soft brush to gently remove it.
Can I use the A412MWS for live vocals?
Yes, the A412MWS is designed as a performance microphone with a robust metal construction and cardioid pickup, making it suitable for live stage use.
What is the frequency response of the A412MWS and how does it affect sound?
The frequency response is 50 Hz to 15 kHz, which captures the essential range of voice and most instruments. It provides a warm and natural tone with a slight presence boost for clarity.
Is the A412MWS compatible with standard XLR cables?
Yes, it has a standard XLR 3-pin output, so you can use any conventional microphone cable. Always use a balanced cable for best signal quality.
What should I do if the microphone output is very low?
Check the cable connections and ensure the cable is not damaged. Increase the gain on your mixer or interface. If the issue persists, try a different cable or input to isolate the problem.
Can I replace the grille or capsule if damaged?
Yes, the grille and capsule are replaceable parts. Contact Shure or an authorized service center for genuine spare parts. Repairs should be done by a qualified technician.
User questions about A412MWS SHURE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Microphone in PDF format for free! Find your manual A412MWS - SHURE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. A412MWS by SHURE.
USER MANUAL A412MWS SHURE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SHURE
Model : A412MWS
Category : Microphone