PTL7200FEX - Washing machine Philco - Free user manual and instructions
Find the device manual for free PTL7200FEX Philco in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Freestanding washing machine |
| Brand | Philco |
| Model | PTL7200FEX |
| Capacity | 7 kg |
| Max Spin Speed | 1200 rpm |
| Energy Class | A+++ |
| Width | 60 cm |
| Height | 85 cm |
| Depth | 54 cm |
| Net Weight | 65 kg |
| Power Supply | 220-240 V, 50 Hz |
| Noise Level (Wash) | 60 dB(A) |
| Noise Level (Spin) | 80 dB(A) |
| Water Consumption (per cycle) | 45 L |
| Number of Programs | 15 |
| Control Type | Electronic display and dial |
| Delay Start | 1 to 24 hours |
| Drum Material | Stainless steel |
| Child Lock | Yes |
| Safety Features | Overheating protection, unbalanced load detection, door lock |
| Maintenance | Self-cleaning detergent drawer, accessible drain filter |
| Spare Parts Availability | Genuine spare parts available for up to 10 years |
Frequently Asked Questions - PTL7200FEX Philco
How do I clean the drain filter on my Philco PTL7200FEX?
To clean the drain filter, first unplug the appliance and allow the water to cool. Open the filter flap at the bottom front, place a towel to catch water, then unscrew the filter cap and remove any debris. After cleaning, replace the cap and ensure it is securely closed. Regular cleaning prevents blockages and maintains draining performance.
Why is my washing machine not starting?
Check if the appliance is properly connected to the power supply and the door is fully closed. Ensure the water supply tap is open and the selected program is correctly set. If the machine still doesn't start, refer to the error code displayed and consult the troubleshooting section of the manual.
How can I use the delay start function?
The delay start function allows you to preset a time (1-24 hours) before the wash cycle begins. After selecting a program, press the delay start button until the desired delay appears on the display, then press start. The machine will automatically start the cycle at the set time, helping you take advantage of off-peak energy tariffs.
What does error code E20 indicate?
Error code E20 typically indicates a drainage problem. The machine is unable to pump out water. Check the drain hose for kinks or blockages, and clean the drain filter. Make sure the hose end is not submerged too deep in the drain pipe. After resolving the issue, reset the appliance.
How do I clean the detergent drawer?
Press the release button and pull the drawer out completely. Rinse it under warm water and wipe away any detergent residue. Use a soft brush to clean the recess. For best results, clean the drawer every 2-3 months to prevent mould and bacteria growth.
What is the maximum spin speed?
The maximum spin speed of your Philco PTL7200FEX is 1200 rpm. This high spin speed effectively reduces drying time. You can adjust spin speed based on the fabric type using the spin speed selector.
How should I install the washing machine?
Choose a level, stable surface away from direct sunlight and heat sources. Connect the inlet hose to a water supply with pressure between 0.1 and 1 MPa, and place the drain hose into a standpipe or sink. Make sure to remove all transport bolts before first use. Level the machine by adjusting the feet, and plug it into a grounded socket that matches the specified voltage.
How can I prevent unpleasant odours in the washing machine?
To prevent odours, leave the door slightly open after each wash to allow the drum to dry. Run a hot cycle (e.g., 90°C) with an empty drum and a suitable cleaning agent once a month. Clean the door seal and detergent drawer regularly. Avoid using too much detergent, which can cause residue buildup.
Can I wash curtains in the washing machine?
Yes, most curtains can be washed in the washing machine on a gentle or hand-wash cycle. Check the care label first. Use a delicate program with cold water and place lightweight curtains in a laundry bag to protect them. Avoid spinning at high speeds; a spin speed of 400-600 rpm is recommended.
How do I reset the washing machine?
If the appliance is unresponsive or shows an error, you can perform a reset. Turn off the washing machine, unplug it from the power outlet, wait for about 5 minutes, and then plug it back in. Select and run a rinse and spin cycle to clear any residual error. This process restores the factory default settings.
User questions about PTL7200FEX Philco
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Washing machine in PDF format for free! Find your manual PTL7200FEX - Philco and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PTL7200FEX by Philco.
USER MANUAL PTL7200FEX Philco
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Philco
Model : PTL7200FEX
Category : Washing machine