Leva - Coffee maker La Marzocco - Free user manual and instructions
Find the device manual for free Leva La Marzocco in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Semi-automatic lever espresso coffee maker |
| Brand | La Marzocco |
| Model | Leva |
| User manual | Digital PDF manual – 108 pages (English) |
| Dimensions (W×D×H) | 600 × 520 × 480 mm |
| Weight | 58 kg |
| Power supply | 230 V ~ 50/60 Hz |
| Power consumption | 2200 W |
| Boiler type | Dual stainless steel boilers with saturated group head |
| Water supply | Direct connection to main water line |
| Extraction pressure | 9 bar nominal |
| Functions | Lever-based manual pre-infusion and extraction, professional steam wand, hot water spout |
| Cleaning | Daily backflush; weekly group gasket maintenance |
| Safety | Safety valve, boiler overheat protection, anti-vacuum valve |
| Spare parts | Available through La Marzocco certified dealers; group seals, filters and lever bushings are user-serviceable |
| Made in | Italy |
Frequently Asked Questions - Leva La Marzocco
How do I set the correct brew pressure?
The Leva was designed to deliver 9 bar pressure at the group. With the lever, you control pre-infusion and extraction. Gently pull down until slight resistance, then wait about 5 seconds for pre-infusion, then continue to push up to complete the shot.
What type of water should I use?
Use filtered or soft water. Avoid highly mineralized water to reduce scaling. The machine needs to be connected to the water line with a pressure reducer if necessary.
How often should I clean the machine?
Backflush daily using a blind filter and espresso cleaning detergent. Disassemble and soak the group parts weekly. Wipe steam wand after each use.
Can I use pre-ground coffee?
Yes, but for best results use freshly ground coffee with a grinder suitable for espresso. The Leva's basket is designed for 14g doses.
How do I steam milk correctly?
Submerge the tip under the milk surface, angle to create a vortex, open steam valve fully, allow to spin until desired temperature (55–65°C), then close and purge.
What is the purpose of the lever?
The lever gives manual control over pre-infusion and pressure profiling, allowing you to adjust flow to highlight different coffee flavors.
How do I descale the machine?
Use a descaling solution approved for espresso machines. Follow the mixing instructions, run through the boilers, then flush thoroughly. For internal descaling, contact a professional if you are not comfortable.
How do I obtain spare parts?
Contact an official La Marzocco dealer or service center. Many consumable parts like gaskets, screens, shower screens, and lever seals are available for user replacement.
Why is the lever hard to move?
The lever mechanism may need lubrication or the main spring may need adjustment. Check that the piston is clean and the seals are in good condition. Apply food-safe lubricant to the pivot points.
Can the machine be installed under a counter?
No, the Leva is a tall commercial machine and requires clear access from above for the lever. Place it on a stable work surface with sufficient headroom for lever travel.
User questions about Leva La Marzocco
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Coffee maker in PDF format for free! Find your manual Leva - La Marzocco and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Leva by La Marzocco.