John 5 Ghost Telecaster - Guitar FENDER - Free user manual and instructions
Find the device manual for free John 5 Ghost Telecaster FENDER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Guitar (Solid Body) |
| Model Name | John 5 Ghost Telecaster |
| Manufacturer | Fender |
| Body Material | Basswood |
| Neck Material | Maple |
| Fingerboard Material | Maple |
| Scale Length | 25.5" (648 mm) |
| Number of Frets | 22 |
| Pickups | Seymour Duncan JB (bridge), Seymour Duncan Vintage P-90 (neck) |
| Bridge | Floyd Rose Double-Locking Tremolo |
| Controls | Master Volume, Master Tone, 3-Position Blade Selector |
| Dimensions (Approx.) | 40" x 12.5" x 1.75" (1016 x 318 x 44 mm) |
| Weight (Approx.) | 8 lbs (3.6 kg) |
| Power Supply | None (Passive Electronics) |
| Cleaning & Maintenance | Wipe with a soft dry cloth; use guitar polish; replace strings regularly; adjust truss rod as needed. |
| Safety Warnings | Keep away from moisture and extreme temperatures; avoid prolonged direct sunlight. |
| Spare Parts & Repairability | Standard Fender parts available; serviceable by certified guitar technicians. |
| Warranty | Standard Fender limited warranty |
| Finish | Ghost White with black binding |
| Hardware | Chrome |
Frequently Asked Questions - John 5 Ghost Telecaster FENDER
How do I change the strings on my Fender John 5 Ghost Telecaster?
First, loosen each string using the tuning pegs, then unlock the Floyd Rose locking nut. Use a hex wrench to release the saddle clamps and remove strings. Insert new strings, tighten saddle clamps, tune to pitch, and re-lock the nut.
How do I adjust the truss rod?
Insert an adjustment wrench into the truss rod nut located at the headstock. Turn clockwise to straighten the neck, counterclockwise to add relief. Make small adjustments (1/4 turn) and check neck bow.
How do I maintain the Floyd Rose bridge?
Regularly clean the knife edges and pivot studs with a soft cloth. Avoid excessive friction by ensuring the tremolo is balanced. Replace worn claw springs if pitch stability suffers.
Can I use this guitar with a tuner?
Yes, the passive pickups output a signal suitable for any standard guitar tuner. For drop tunings, use a chromatic tuner for accurate pitch detection.
How do I clean the Ghost finish?
Wipe the body with a microfiber cloth after playing to remove fingerprints. For deeper cleaning, use a guitar-safe polish sparingly. Avoid abrasive pads or harsh chemicals.
What type of pickups does it have?
This model features a Seymour Duncan JB humbucker in the bridge and a Seymour Duncan Vintage P-90 in the neck, providing versatile rock and metal tones.
How do I set the intonation?
Tune the guitar, then compare the 12th fret harmonic to the fretted note. If sharp, move the saddle back; if flat, move it forward. Repeat for each string, then retune.
How do I install a string through the tremolo?
Cut the string ball end, insert the thread into the saddle block from the bridge side. Pull through, then tighten the saddle clamp with a hex wrench. Ensure the string sits in the locking nut.
What kind of strings should I use?
Fender recommends using light gauge strings (.009-.042) for everyday play. Heavier gauges may require re-setting the spring tension in the back cavity.
Is the guitar passive or active?
This guitar is passive, meaning it uses no battery or external power source. The sound is produced purely by the magnetic pickups, unaffected by batteries.
User questions about John 5 Ghost Telecaster FENDER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Guitar in PDF format for free! Find your manual John 5 Ghost Telecaster - FENDER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. John 5 Ghost Telecaster by FENDER.