DSG3136B - Generator Rigol - Free user manual and instructions
Find the device manual for free DSG3136B Rigol in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | RF Signal Generator |
| Brand | Rigol |
| Model | DSG3136B |
| Frequency Range | 9 kHz to 3.6 GHz |
| Output Power Range | -110 dBm to +10 dBm |
| Modulation Types | AM, FM, PM, Pulse |
| Sweep Modes | Step Sweep, List Sweep |
| Display | 4.3-inch TFT LCD |
| Dimensions (W × H × D) | 320 mm × 120 mm × 350 mm |
| Weight | Approximately 4.5 kg |
| Power Supply | 100-240 V AC, 50-60 Hz |
| Frequency Resolution | 0.01 Hz |
| Amplitude Accuracy | ±0.5 dB (typical) |
| Interfaces | USB, LAN, GPIB (optional) |
| Phase Noise | -115 dBc/Hz @ 1 GHz (typical) |
| Switching Time | 5 ms (typical) |
| Cleaning | Use a soft dry cloth; mild detergent if necessary |
| Safety | Operate in dry environment; avoid overheating |
| Spare Parts & Repairability | Contact Rigol authorized service provider |
| General Information | Use only approved cables and accessories |
Frequently Asked Questions - DSG3136B Rigol
What is the frequency range of the Rigol DSG3136B?
The DSG3136B covers a frequency range from 9 kHz to 3.6 GHz, making it suitable for testing a wide variety of RF devices.
What modulation types are available on the DSG3136B?
It supports AM, FM, PM, and pulse modulation, allowing you to simulate realistic signals for receiver testing and troubleshooting.
How do I set up a basic AM signal?
Press the MOD key, select AM, then set the modulation depth and frequency. Use the RF On/Off key to enable the output.
Can I control the DSG3136B remotely via a computer?
Yes, the generator provides USB, LAN, and optional GPIB interfaces. You can use SCPI commands for remote programming and automation.
What is the maximum output power?
The maximum output power is typically +10 dBm (at higher frequencies). Use the level adjustment to set the desired amplitude.
How should I clean and maintain the signal generator?
Use a soft, dry cloth to wipe the exterior. For stubborn marks, slightly dampen the cloth with water and mild detergent, then dry immediately. Do not use solvents or abrasives.
Does the DSG3136B support frequency sweeps?
Yes, it offers step sweep and list sweep modes, which are useful for measuring frequency responses and characterizing components.
How do I update the firmware?
Download the latest firmware from Rigol’s official website, save it to a USB drive, and use the Update Firmware option in the system menu.
What is the recommended calibration interval?
For optimal accuracy, it is recommended to calibrate the DSG3136B annually or whenever unusual measurement errors are observed.
How can I ensure safe operation?
Operate the device within the specified temperature range, avoid moisture, and never connect external signals above +20 dBm to the RF output.
User questions about DSG3136B Rigol
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Generator in PDF format for free! Find your manual DSG3136B - Rigol and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DSG3136B by Rigol.
USER MANUAL DSG3136B Rigol
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Rigol
Model : DSG3136B
Category : Generator