DS-K1T642MF - Access Control Hikvision - Free user manual and instructions
Find the device manual for free DS-K1T642MF Hikvision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Face Recognition Access Control Terminal |
| Brand | Hikvision |
| Model | DS-K1T642MF |
| Display | 7-inch touch screen |
| Camera | 2 MP wide-angle camera |
| Authentication Methods | Face recognition, IC card, password, and combinations |
| Face Recognition Distance | 0.3 m to 1.5 m |
| Capacity | 10,000 faces, 100,000 cards, 150,000 events |
| Communication | TCP/IP, RS-485, Wiegand |
| Power Supply | 12 V DC |
| Operating Temperature | -10 °C to 55 °C |
| Dimensions | 289.8 mm x 103.5 mm x 34.5 mm |
| Weight | Approximately 1.4 kg |
| Installation | Wall-mounted |
| Security Features | Anti-spoofing algorithm, tamper alarm |
| Maintenance | Clean screen with a soft, dry cloth |
| Spare Parts | Replacement power adapter, mounting bracket, and internal modules available via Hikvision service centers |
| Repairability | Modular design for easy component replacement and servicing |
| General Information | Comes with a 212-page user manual in English (PDF) |
Frequently Asked Questions - DS-K1T642MF Hikvision
How do I reset the DS-K1T642MF to factory settings?
To reset the device, press and hold the reset button (usually located on the bottom or back panel) for about 10 seconds until the system reboots. Alternatively, use the web interface: go to Configuration > System > Maintenance and click Factory Defaults. Note that this will erase all users and settings.
How can I add users to the access control terminal?
You can add users through the device touchscreen (Menu > User Management > Add) or remotely via the Hikvision Access Control Software or web interface. Each user can be assigned a face, card, password, or a combination. Ensure the user's face is well-lit during enrollment for better recognition.
What should I do if the face recognition fails frequently?
First, clean the camera lens with a soft cloth. Check that the face is within 0.3 m to 1.5 m and directly facing the camera. Avoid strong backlighting and adjust the device angle if needed. If issues persist, re-enroll the user's face in good lighting conditions and ensure the firmware is up to date.
Can the device work offline without a network connection?
Yes, the DS-K1T642MF can operate in standalone mode. It stores up to 10,000 faces and 100,000 cards locally, and all access events are saved in its memory. However, a network connection is recommended for centralized management and remote monitoring.
How do I connect the device to my network?
Connect an Ethernet cable to the device's RJ45 port and ensure your router assigns an IP address (or set a static IP via the device menu). Then, access the device using the Hikvision SADP tool or directly via a web browser using its IP address.
What are the recommended practices for maintaining the device?
Regularly clean the touchscreen and camera with a soft, dry cloth. Avoid using harsh chemicals. Keep the device away from dust and humidity. Update the firmware periodically and check that the mounting is secure. Also, replace the power adapter if it shows signs of wear.
Is the device suitable for outdoor use?
The DS-K1T642MF is primarily designed for indoor use. It has a front panel with IP65 protection against dust and water splashes, but it should not be exposed to heavy rain or extreme temperatures. For outdoor installation, install it under a canopy or use a weatherproof housing.
How do I update the firmware?
Download the latest firmware from the Hikvision official website or contact your distributor. Access the device's web interface, go to Configuration > System > Firmware Upgrade, and upload the .bin file. Do not power off during the upgrade process.
Can I use the device with third-party access control systems?
Yes, the device supports Wiegand output (26/34/42-bit) and RS-485, allowing integration with most third-party controllers. You can configure the output format via the device menu or web interface under Access Control> Wiegand.
What should I do if the touch screen does not respond?
First, restart the device by unplugging the power and plugging it back in. If the issue persists, check for visible scratches or damage to the screen. Calibrate the touch screen via Configuration > System > Touch Screen Calibration. If needed, contact Hikvision support for a replacement.
User questions about DS-K1T642MF Hikvision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Control in PDF format for free! Find your manual DS-K1T642MF - Hikvision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS-K1T642MF by Hikvision.
USER MANUAL DS-K1T642MF Hikvision
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hikvision
Model : DS-K1T642MF
Category : Access Control