TeraStation 5600DN WSS - NAS BUFFALO - Free user manual and instructions
Find the device manual for free TeraStation 5600DN WSS BUFFALO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | NAS (Network Attached Storage) with Windows Storage Server |
| Brand | Buffalo |
| Model | TeraStation 5600DN WSS |
| Category | NAS |
| Drive Bays | 5 |
| Storage Capacity | Up to 80TB (with 16TB HDDs) |
| Supported RAID Modes | RAID 0, 1, 5, 6, 10, JBOD |
| Hot-Swap Drives | Yes |
| Network Interface | 2 x Gigabit Ethernet LAN ports |
| USB Ports | 3 x USB 3.0 (host) |
| Processor | Intel Atom C2358 dual-core 2.0GHz (approximate) |
| System Memory | 2GB DDR3 |
| Dimensions | 170 x 230 x 310 mm (W x H x D) |
| Weight | Approximately 7.8 kg (without installed drives) |
| Power Supply | AC 100-240V, 50/60Hz, 200W |
| Operating Temperature Range | 0 to 40°C |
| Main Functions | Centralized file storage, multi-protocol SMB/NFS/iSCSI, cloud mirroring, and backup target |
| Maintenance and Cleaning | Keep the vents clean and install in a ventilated area; wipe the case with a soft dry cloth |
| Security | HTTPS management, user/group quotas, Active Directory integration, BitLocker encryption support |
| Spare Parts and Repairability | Hot-swappable drives, user-replaceable power supply and cooling fans; repair services available |
| General Information | Enterprise-grade 5-bay network storage with Windows Storage Server for seamless Windows integration |
Frequently Asked Questions - TeraStation 5600DN WSS BUFFALO
What operating system does the TeraStation 5600DN WSS use?
It uses a specialized Windows Storage Server version, providing a familiar Windows environment for IT administrators and supporting native SMB, NFS, and iSCSI protocols.
How do I initially access the NAS?
Use BUFFALO's NAS Navigator tool or the web-based management console at the device's IP address. The default credentials are typically printed on the device label.
What RAID configurations are available?
The device supports RAID 0, 1, 5, 6, 10, and JBOD. You can configure RAID during initial setup via the management interface.
Can I replace or add drives without turning off the NAS?
Yes, the TeraStation supports hot-swap drive replacement. You can remove a faulty drive and insert a new one while the system is running.
How can I back up data from my Windows PC?
Use the built-in backup utility in Windows Storage Server, or map a network drive and use File History or Robocopy. The NAS can also act as a backup target for macOS via Time Machine.
What security features are included by default?
Security is handled through user/group permissions, Active Directory integration, HTTPS for encrypted management, BitLocker for drive encryption, and firewall rules.
Is it possible to connect external USB drives?
Yes, there are three USB 3.0 ports that allow attaching external storage devices or a UPS for safe shutdown.
How do I perform a factory reset?
Press and hold the reset button on the back panel for about 10 seconds until the status LED blinks. This will restore the device to its default factory settings.
What type of maintenance is recommended?
Periodically check the system temperature and disk health via the management console. Clean the air vents to prevent dust build-up and ensure proper cooling.
Can I expand the storage capacity later?
Yes, you can replace all existing drives with higher-capacity drives one by one, using RAID rebuilding to expand the volume without data loss.
User questions about TeraStation 5600DN WSS BUFFALO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your NAS in PDF format for free! Find your manual TeraStation 5600DN WSS - BUFFALO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TeraStation 5600DN WSS by BUFFALO.