TS-802 - Uncategorized TOA - Free user manual and instructions
Find the device manual for free TS-802 TOA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Professional PA Loudspeaker System |
| Brand | TOA Corporation |
| Model | TS-802 |
| Driver Configuration | 2-way bass-reflex with 8" woofer and 1" tweeter |
| Frequency Response | 55 Hz – 20 kHz |
| Rated Impedance | 8 ohms |
| Power Handling (RMS) | 30 W |
| Power Handling (Peak) | 60 W |
| Sensitivity (1W/1m) | 90 dB SPL |
| Maximum SPL | 112 dB SPL |
| Input Connectors | Screw terminal blocks |
| Mounting | Wall or ceiling mount via included bracket |
| Enclosure Material | ABS resin with scratch-resistant finish |
| Dimensions (W x H x D) | 230 x 320 x 210 mm |
| Weight | 3.5 kg |
| Operating Temperature | -10°C to +50°C |
| Color | Black |
| Features | High clarity sound for speech and music |
| Compatibility | Works with TOA amplifiers (e.g., A-300 series) |
| Installation | Simple two-step mounting with safety wire attachment |
| Maintenance | Wipe with dry, soft cloth; avoid water and solvents |
| Safety | Do not exceed rated input; proper insulation from water |
| Spare Parts | Available through TOA authorized dealers |
| Repairability | Replaceable drivers and terminal parts |
| Environmental | RoHS compliant |
Frequently Asked Questions - TS-802 TOA
How do I connect the TOA TS-802 to my amplifier?
Use the screw terminal blocks on the rear of the speaker. Connect the positive (+) and negative (-) terminals to the corresponding outputs of your amplifier, ensuring the amplifier is powered off during connection.
What is the impedance and power rating of the TS-802?
The TS-802 has an 8-ohm impedance and a power handling of 30 W RMS (60 W peak). Match these specifications with your amplifier to avoid overloading.
Can the TS-802 be used outdoors?
The TS-802 is designed primarily for indoor use. If outdoor installation is required, it must be installed under a protective cover to prevent direct exposure to rain or moisture.
How do I mount the speaker securely?
Use the included mounting bracket to attach the speaker to a wall or ceiling. For enhanced safety, always fasten the safety wire to a separate structural point to prevent accidental falls.
What amplifier power is recommended for optimal performance?
We recommend an amplifier providing 30 to 60 watts per channel at 8 ohms. This allows the speaker to reach its full dynamic range without distortion or damage.
How should I clean and maintain the TS-802?
Clean the enclosure with a soft, dry cloth. Do not use water, cleaners, or solvents, as they may damage the finish or internal components. Periodically check and tighten all connections.
Does the speaker come with a mounting bracket?
Yes, a wall/ceiling mounting bracket is included in the package. The bracket allows for flexible angling to direct sound where needed.
Is the TS-802 compatible with 70V/100V line systems?
The TS-802 is a low-impedance (8 ohm) speaker. For 70V/100V constant voltage systems, you must add an optional matching line transformer (e.g., TOA MT-series) between the amplifier and speaker.
What are the frequency response and coverage angle?
The TS-802 provides a frequency response of 55 Hz – 20 kHz and a wide coverage angle (approx. 100° horizontal, 80° vertical) suitable for audience areas in small to medium rooms.
How can I obtain spare parts or repair service?
Contact your local TOA authorized dealer or distributor. They can provide genuine spare parts such as drivers, terminals, and grilles, as well as professional repair services.
User questions about TS-802 TOA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual TS-802 - TOA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TS-802 by TOA.