iHM10 - Loudspeaker IHOME - Free user manual and instructions
Find the device manual for free iHM10 IHOME in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable Wireless Speaker |
| Brand | IHOME |
| Model | iHM10 |
| Dimensions (W x H x D) | 15.8 x 6.5 x 6.5 cm |
| Weight | 310 g |
| Power Supply | Rechargeable lithium battery |
| Battery Capacity | 1800 mAh |
| Charging Time | 2-3 hours |
| Playback Time | Up to 10 hours at 50% volume |
| Bluetooth Version | 5.0 |
| Wireless Range | 10 m |
| Output Power | 5 W |
| Frequency Response | 80 Hz - 20 kHz |
| Driver Units | 1 x 52 mm full-range |
| Controls | Power, Volume, Play/Pause, Pairing |
| Built-in Microphone | Yes |
| Waterproof Rating | IPX5 |
| Compatibility | Smartphones, tablets, computers |
| Package Contents | Speaker, USB charging cable, user manual |
Frequently Asked Questions - iHM10 IHOME
How do I pair my iHM10 speaker with my phone?
Turn on the speaker by pressing and holding the power button. The speaker will enter pairing mode automatically. On your device, enable Bluetooth and select IHOME iHM10 from the list. Once connected, you will hear a confirmation tone.
How long does the battery last on a full charge?
The iHM10 provides up to 10 hours of playback time at 50% volume. Actual battery life may vary depending on the volume level and audio content.
How do I charge the speaker?
Connect the included USB cable to the charging port on the speaker and the other end to a USB power adapter. The battery indicator light will show the charging status. Fully charge the speaker for 2-3 hours before first use.
Can I use the speaker while it is charging?
Yes, you can use the iHM10 while it is connected to a power source. However, for optimal battery health, we recommend disconnecting the charger once the battery is full.
How do I reset the speaker to factory settings?
To reset, turn off the speaker, then press and hold the power button and the play/pause button simultaneously for about 5 seconds until the LED flashes. This will clear the pairing history and reset the speaker.
What should I do if there is no sound coming from the speaker?
Check the volume level on both the speaker and your connected device. Make sure the speaker is in pairing mode and connected. If the problem persists, reset the speaker and try pairing again.
Is the iHM10 speaker waterproof?
The speaker has an IPX5 rating, meaning it is protected against water splashes from any direction. It is not fully waterproof and should not be submerged in water.
Can I use the speaker with voice assistants like Siri or Google Assistant?
Yes, the built-in microphone allows you to activate your device's voice assistant. Simply press the play/pause button to trigger the voice assistant on your connected device.
How do I clean and maintain the speaker?
Use a soft, dry cloth to clean the exterior. Avoid using harsh chemicals or water. Keep the speaker away from dust and extreme temperatures to maintain its performance.
Can I connect two iHM10 speakers together for stereo sound?
Some models support TWS (True Wireless Stereo) pairing. If your iHM10 has this feature, press and hold the pairing button on both speakers to link them. Check the user manual for specific instructions.
User questions about iHM10 IHOME
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual iHM10 - IHOME and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. iHM10 by IHOME.
USER MANUAL iHM10 IHOME
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : IHOME
Model : iHM10
Category : Loudspeaker