SAVA-D900 - Loudspeaker SONY - Free user manual and instructions
Find the device manual for free SAVA-D900 SONY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | High-Fidelity Active Loudspeaker System |
| Model | SAVA-D900 |
| Brand | Sony |
| Speaker Type | Bass-reflex, 2-way design |
| Frequency Response | 40 Hz - 20 kHz |
| Impedance | 8 ohms |
| Sensitivity | 87 dB (1W/1m) |
| Dimensions (W x H x D) | 220 x 380 x 280 mm |
| Weight | 8 kg per speaker |
| Power Supply | AC 100-240V, 50/60Hz (built-in amplifier) |
| Amplifier Output | 100W per channel |
| Connectivity | Speaker level inputs, RCA and optical inputs |
| Main Features | Built-in digital amplifier, bass reflex port, auto standby |
| Care and Cleaning | Wipe with a soft, dry cloth |
| Safety Warnings | Do not place near water or heat sources |
| Spare Parts | Genuine Sony parts available at authorized service centers |
| Repairability | Repairs should be done by qualified technicians |
| Manual | Free PDF manual available at notice-facile.com |
| General Information | Designed for home theater and music playback |
Frequently Asked Questions - SAVA-D900 SONY
How do I connect the SAVA-D900 speakers to my amplifier?
Connect the speaker terminals to your amplifier using high-quality speaker wire with banana plugs or bare wire. Ensure the positive and negative terminals match.
What is the recommended placement for the speakers?
Place the speakers at ear level when seated, and keep them away from walls to allow the bass reflex port to work properly. Angle them slightly towards the listening position.
Why is there no sound coming from one speaker?
Check the speaker wire connection, the balance control on your amplifier, and ensure the speaker is not in standby. Swap the wire to test if the speaker itself is faulty.
How do I clean the speaker grille?
Remove the grille carefully and use a soft brush or lint roller to remove dust. For stains, use a slightly damp cloth with mild detergent. Let it dry completely before reattaching.
Can I use these speakers with a TV?
Yes, you can connect them to a TV using the RCA output if your TV has one, or through a stereo receiver or home theater amplifier. Adjust the balance and volume accordingly.
What type of cable should I use?
Use 16-14 gauge speaker wire for distances under 15 meters. For longer runs, use thicker wire to minimize resistance and signal loss.
Does the speaker require a subwoofer?
The SAVA-D900 can reproduce bass down to 40 Hz, but adding a subwoofer will enhance low frequencies for a more immersive home theater experience.
How do I replace the tweeter if it's damaged?
Purchase a genuine Sony tweeter from an authorized service center. Open the speaker cabinet, unscrew the damaged tweeter, and disconnect the wire. Install the new tweeter in reverse order.
Are these speakers magnetically shielded?
Yes, the speakers feature magnetically shielded drivers, allowing placement near CRT televisions without causing color distortion.
What is the power handling of the SAVA-D900?
The speakers handle 100W RMS with a peak power of 200W. Use an amplifier rated between 50W and 150W per channel for safe operation.
User questions about SAVA-D900 SONY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual SAVA-D900 - SONY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SAVA-D900 by SONY.
USER MANUAL SAVA-D900 SONY
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SONY
Model : SAVA-D900
Category : Loudspeaker