ASR 100 - Antenna splitter Comar - Free user manual and instructions
Find the device manual for free ASR 100 Comar in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Antenna Splitter |
| Brand | Comar |
| Model | ASR 100 |
| Dimensions | Approximately 120 x 80 x 35 mm |
| Weight | Around 200 g |
| Power Supply | Passive device, no external power required |
| Frequency Range | 5 – 2400 MHz (typical for TV/satellite splits) |
| Number of Outputs | 2 (typical splitter) |
| Insertion Loss | ≤ 4 dB |
| Isolation | ≥ 20 dB |
| Connector Type | F-type female connectors |
| Impedance | 75 Ohms |
| Main Functions | Splits an antenna signal to two devices while maintaining signal quality |
| Maintenance and Cleaning | Wipe with a dry, soft cloth; avoid moisture and solvents |
| Safety | Keep away from water; use only indoors unless specified weatherproof |
| Spare Parts and Repairability | No user-serviceable parts inside; contact qualified technician for repairs |
| General Information | Compatible with most TV and satellite receivers |
| Mounting | Wall mountable with screws (not included) |
Frequently Asked Questions - ASR 100 Comar
What is the Comar ASR 100 used for?
The ASR 100 is an antenna splitter that allows you to distribute a single antenna signal to multiple devices, such as televisions or radios, without significant loss.
Does the ASR 100 require a power source?
No, it is a passive device and works without an external power supply. It simply splits the RF signal.
How many outputs does the ASR 100 have?
It typically has two outputs, enabling you to connect two receivers to one antenna.
What type of connectors does it use?
The ASR 100 uses F-type female connectors, which are standard for TV and satellite installations.
Can I use the ASR 100 for satellite TV?
Yes, it supports a wide frequency range from 5 MHz to 2400 MHz, covering terrestrial and satellite signals.
What is the insertion loss of the splitter?
The insertion loss is approximately 4 dB, meaning a small reduction in signal strength is expected and generally acceptable.
Is the ASR 100 weatherproof?
It is designed for indoor use. If outdoor installation is required, it should be placed in a protected enclosure.
How do I connect the ASR 100?
Connect your antenna cable to the input port and then connect your devices to the output ports using coaxial cables with F-connectors.
What should I do if one output has no signal?
Check that all cables are securely tightened. Also verify that the antenna signal is strong enough before splitting, as the signal is divided between outputs.
Can I use the ASR 100 to combine two antennas?
No, it is a splitter, not a combiner. It only divides one signal into multiple outputs, not the reverse.
User questions about ASR 100 Comar
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Antenna splitter in PDF format for free! Find your manual ASR 100 - Comar and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ASR 100 by Comar.
USER MANUAL ASR 100 Comar
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Comar
Model : ASR 100
Category : Antenna splitter