TFC5EI-X - Cables for Computers and Peripherals Panduit - Free user manual and instructions
Find the device manual for free TFC5EI-X Panduit in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Category 5e UTP Network Cable |
| Brand | Panduit |
| Model | TFC5EI-X |
| Cable Category | Category 5e (Cat5e) |
| Cable Shielding | Unshielded Twisted Pair (UTP) |
| Connector Type | RJ45 (8P8C) on both ends |
| Number of Pairs | 4 pairs (8 wires) |
| Conductor Gauge | 24 AWG solid copper |
| Frequency Rating | 100 MHz |
| Data Rate | Up to 1000 Mbps (Gigabit) over 100 m |
| Cable Jacket | PVC, CM rated (general purpose) |
| Bend Radius | 4× cable diameter (22 mm) |
| Operating Temperature | -10 °C to 60 °C |
| Cable Diameter | 5.5 mm |
| Weight per Meter | 30 g (approx) |
| Power Consumption | 0 W (passive cable) |
| Main Function | Transmit Ethernet data between computers, switches, routers, and peripherals |
| Maintenance | Wipe with dry cloth; keep connectors dust-free |
| Safety | Avoid severe bending, pulling, or exposure to water and heat; use cable ties gently |
| Spare Parts | RJ45 connectors are replaceable (re-termination) |
| Standards | TIA/EIA-568-C.2, ISO 11801, RoHS compliant |
| General Info | Suitable for LAN, PoE (up to 30W), and HDBaseT applications |
Frequently Asked Questions - TFC5EI-X Panduit
What is the Panduit TFC5EI-X used for?
The Panduit TFC5EI-X is a Category 5e Unshielded Twisted Pair (UTP) network cable used to connect computers, switches, routers, and peripherals in Ethernet networks. It supports data speeds up to 1 Gbps and is suitable for Power over Ethernet (PoE) applications.
What does Cat5e mean?
Cat5e stands for Category 5 Enhanced. It is a standardized twisted pair cable that supports frequencies up to 100 MHz and provides improved performance over standard Cat5, allowing Gigabit Ethernet (1000BASE-T) transmissions over distances up to 100 meters.
Is the TFC5EI-X shielded?
No, the TFC5EI-X is an Unshielded Twisted Pair (UTP) cable. It does not have additional shielding like FTP or STP. UTP is suitable for most office and home environments with low electromagnetic interference. For higher interference areas, shielded cables are recommended.
What are the maximum data transmission speeds?
The TFC5EI-X cable is rated for 100 MHz bandwidth and supports 10BASE-T (10 Mbps), 100BASE-TX (100 Mbps), and 1000BASE-T (1 Gbps) Ethernet standards. In practical use, it can reliably carry Gigabit Ethernet signals up to 100 meters.
Can I use this cable outdoors?
The TFC5EI-X has a PVC CM jacket which is rated for general indoor use only. It is not suitable for outdoor installation unless placed inside a protective conduit. For outdoor applications, look for cables with CMX or outdoor-rated jackets.
How do I terminate this cable with RJ45 connectors?
To terminate the TFC5EI-X, strip about 2 cm of jacket, untwist the pairs, and arrange wires according to the T568A or T568B wiring standard. Insert the wires into an RJ45 plug and crimp using a crimp tool. Ensure the cable jacket is secured under the plug strain relief.
What is the maximum cable length for Ethernet?
For solid Cat5e cabling, the maximum horizontal length is 90 meters plus 10 meters of patch cables, totaling 100 meters per the TIA/EIA-568 standard. This applies to the TFC5EI-X when used in structured cabling systems.
How do I clean the cable and connectors?
Clean the cable with a dry lint-free cloth to remove surface dirt. For RJ45 connectors, use compressed air or a connector cleaner to remove dust from the pins. Avoid using liquids directly on connectors and always disconnect from power before cleaning.
What safety precautions should I take when installing?
Run cables away from power lines and sources of interference. Do not bend the cable beyond its minimum bend radius (4× diameter). Use cable ties without over-tightening to avoid damaging the jacket. Ensure installation complies with local building codes.
Is the TFC5EI-X backward compatible with older cable categories?
Yes, Cat5e cable is backward compatible with Cat5 and Cat3 systems. It can be used with existing 10Base-T or 100Base-TX networks, providing improved noise rejection and performance. It also works with PoE and HDBaseT.
User questions about TFC5EI-X Panduit
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Cables for Computers and Peripherals in PDF format for free! Find your manual TFC5EI-X - Panduit and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TFC5EI-X by Panduit.
USER MANUAL TFC5EI-X Panduit
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Panduit
Model : TFC5EI-X
Category : Cables for Computers and Peripherals