SD-WD - Flat Screen Mount Atdec - Free user manual and instructions
Find the device manual for free SD-WD Atdec in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Flat screen mount |
| Brand | Atdec |
| Model | SD-WD |
| Compatible Screen Sizes | 13" - 32" |
| VESA Mounting Standards | 75x75mm, 100x100mm |
| Maximum Weight Capacity | 8 kg (17.6 lbs) |
| Tilt Adjustment | -5° to +15° |
| Swivel Range | ±90° |
| Rotation | 360° |
| Arm Type | Articulating arm |
| Mounting Options | Desk clamp / grommet |
| Height Adjustment | Yes |
| Cable Management | Yes |
| Material | Aluminum and steel |
| Finish | Black |
| Installation | Desk mount |
| Cleaning and Maintenance | Wipe with a dry cloth; check bolts periodically |
| Safety Instructions | Do not exceed the maximum weight limit |
| Spare Parts | Available upon request |
| Repairability | Replaceable arm segments |
| Warranty | 3 years |
Frequently Asked Questions - SD-WD Atdec
What is the maximum monitor weight for the SD-WD mount?
The SD-WD mount supports monitors up to 8 kg (17.6 lbs). Always verify that your monitor's weight does not exceed this limit to ensure safe and stable operation.
Which VESA patterns are compatible with the SD-WD?
The mount is compatible with standard 75x75mm and 100x100mm VESA mounting patterns, covering most modern flat-panel monitors.
Can I use the SD-WD with a 27-inch monitor?
Yes, the SD-WD accommodates screens from 13 to 32 inches, so a 27-inch monitor is well within the supported range, provided it meets the weight limit.
How do I install the SD-WD mount on my desk?
Installation is straightforward: attach the clamp or grommet base to the desk, secure it firmly, then mount the VESA plate to the back of your monitor and slide it onto the arm. All necessary hardware is included.
Can I adjust the screen height after installation?
Yes, the SD-WD features height adjustment via the articulating arm. You can move the monitor up, down, or tilt it to your preferred viewing angle.
How do I manage cables with this mount?
The mount includes integrated cable management clips or channels to route cables along the arm, keeping your workspace neat and preventing tangles.
What tools are needed for installation?
Only a standard Allen key (hex wrench) is required, which is included in the package. No special tools are needed.
Is the SD-WD compatible with curved monitors?
Yes, curved monitors can be mounted as long as they have a compatible VESA pattern and weigh less than the 8 kg maximum. The articulating arm allows for proper positioning.
How should I clean and maintain the mount?
Clean the mount with a soft, damp cloth and mild detergent. Avoid abrasive cleaners. Periodically check and tighten all bolts to ensure continued stability.
What should I do if the arm loosens over time?
If the arm becomes loose, tighten the pivot bolts using the Allen key. If issues persist, contact Atdec support for spare parts or service.
User questions about SD-WD Atdec
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Flat Screen Mount in PDF format for free! Find your manual SD-WD - Atdec and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SD-WD by Atdec.
USER MANUAL SD-WD Atdec
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Atdec
Model : SD-WD
Category : Flat Screen Mount