DS-2CD1T27G0-LUF - Security Camera Hikvision - Free user manual and instructions
Find the device manual for free DS-2CD1T27G0-LUF Hikvision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Security Camera |
| Brand | Hikvision |
| Model | DS-2CD1T27G0-LUF |
| Resolution | 2 Megapixels (1920 × 1080) |
| Lens | Fixed 2.8 mm lens |
| IR Range | 30 m EXIR |
| Day/Night Mode | ICR infrared cut filter |
| Video Compression | H.265+ / H.265 / H.264 |
| Protection Rating | IP67 weather-proof |
| Housing Type | Bullet type |
| Power Supply | PoE (IEEE 802.3af/at) or 12 VDC |
| Power Consumption | Max. 7 W |
| Operating Temperature | -30 °C to 60 °C |
| Weight | Approx. 800 g (without bracket) |
| Dimensions | 87.7 × 132.5 × 108.9 mm |
| Network Interface | 1 RJ45 10/100M Ethernet |
| Storage | microSD card slot up to 256 GB |
| Alarm Functions | Motion detection, tampering alarm |
| Security | Password protection, HTTPS, IP filtering |
| Maintenance | Clean with a soft dry cloth; keep lens dry |
| Spare Parts and Repairability | Replacement lenses, brackets, and main boards available; service by authorized center |
Frequently Asked Questions - DS-2CD1T27G0-LUF Hikvision
How do I reset the camera to factory defaults?
Press and hold the reset button on the camera for 10 seconds. The camera will reboot and restore default settings, including IP address 192.168.1.64 and admin password.
What is the default IP address and login credentials?
The default IP address is 192.168.1.64. The default username is admin and the password is 12345. It is strongly recommended to change them after the first login.
How can I access the camera remotely?
Access remotely via the Hik-Connect app or iVMS-4200 software. Add the camera by scanning its QR code from the camera label or using the serial number. Ensure your network allows port forwarding or use P2P.
What bandwidth is required for live streaming?
For 1080p at 25 fps, a stable upload speed of 2 Mbps is recommended. Adjust bitrate in the camera settings to reduce bandwidth usage.
Can this camera be used outdoors?
Yes, the camera has an IP67-rated housing that protects against dust and rain. It is designed for outdoor installation and operates between -30 °C and 60 °C.
How do I connect the camera to a PoE switch?
Simply connect an Ethernet cable from the camera to a PoE switch port. The camera will receive both data and power over the single cable. For non-PoE switches, use a 12 VDC power adapter.
What type of microSD card is supported?
The camera supports microSD, microSDHC, and microSDXC cards up to 256 GB. For reliable recording, use a card with a Class 10 rating or higher.
How do I update the firmware?
Download the latest firmware from the Hikvision official website. In the camera's settings, go to Maintenance > Firmware Upgrade, select the file, and click upgrade. Do not power off during the process.
How can I set up motion detection?
Log in to the camera, go to Configuration > Events > Motion Detection. Enable the feature, adjust sensitivity, and draw detection areas. You can set triggers for email alerts or recordings.
How should I clean the camera lens?
Use a soft dry cloth to gently wipe the lens. For stubborn dirt, slightly dampen the cloth with water or lens cleaner. Avoid using abrasive materials. Also, check that the IR glass is free from dust for optimal night vision.
User questions about DS-2CD1T27G0-LUF Hikvision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual DS-2CD1T27G0-LUF - Hikvision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS-2CD1T27G0-LUF by Hikvision.