NIN-832-V03IPS - Security Camera BOSCH - Free user manual and instructions
Find the device manual for free NIN-832-V03IPS BOSCH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network surveillance camera (IP) |
| Brand | BOSCH |
| Model | NIN-832-V03IPS |
| Mounting Type | Ceiling or wall mount, indoor and outdoor rated |
| Dimensions | Approx. 145 mm × 78 mm × 78 mm (without mount) |
| Weight | Approx. 0.55 kg |
| Power Supply | 12 V DC or PoE (IEEE 802.3af), 7 W max |
| Image Sensor | 1/2.8-inch progressive scan CMOS, 2.1 MP |
| Resolution | 1920 × 1080 at 25/30 fps |
| Lens | 3.1–10 mm motorized varifocal, F1.4 |
| Field of View | 104° to 33° horizontal |
| Night Vision | Built-in IR LEDs, range up to 30 m |
| Enclosure Protection | IP66, IK08 |
| Video Compression | H.264, M-JPEG, H.265 |
| Main Functions | Motion detection, tamper alarm, privacy masking, dual streaming |
| Audio | Two-way audio, built-in microphone input and line output |
| Storage | MicroSD slot for local recording (optional card) |
| Operating Temperature | -30 °C to +50 °C |
| Clean and Maintain | Wipe with a dry soft cloth; clean lens with an optical-grade brush if dust build-up occurs |
| Safety | Use a certified 12 V DC power adapter or PoE switch; professional installation recommended |
| Spare Parts and Repairability | Modular unit with replaceable IR LED board, lens module and housing parts |
| General Information | Manual includes full setup guide, network settings and troubleshooting |
Frequently Asked Questions - NIN-832-V03IPS BOSCH
How do I reset the NIN-832-V03IPS to factory settings?
Press and hold the reset button on the back of the unit for 10 seconds while power is on. The camera will restart with factory defaults, including IP address 192.168.1.168.
What type of power source is required?
Use a 12 V DC power adapter or a PoE switch (IEEE 802.3af). Maximum consumption is 7 W. Do not use unregulated power supplies.
Can this camera be used outdoors?
Yes, the enclosure has an IP66 rating, making it protected against dust and powerful water jets, while the IK08 rating provides impact resistance.
How do I connect the camera to my network?
Connect an Ethernet cable from the camera to a router or PoE switch. Use the Bosch IP Helper or Configuration Manager tool to discover the device on your network.
How do I set up motion detection?
Log in to the web interface via your browser, go to Alarm > Motion Detection, enable detection and arrange the sensitivity zones, then define the output alarm.
How can I view the camera remotely?
Configure port forwarding on your router and use Bosch Video Recording Manager or the Remote Portal. You can also access the camera using the Bosch mobile app.
Does the camera have local storage?
Yes, it has a MicroSD slot for optional local recording. It is recommended to use a high endurance card with at least Class 10 speed.
How do I clean the camera without damaging it?
Use a dry microfibre cloth to wipe the housing. For the lens, use a soft brush or a lens cleaner pen. Never use water, solvents, or abrasive sprays directly on the camera.
What should I do if the live image is blurry?
Check that the lens is clean and that the autofocus or motorized zoom is properly adjusted. You can also adjust focus from the web interface under Installation settings.
Where can I find the serial number?
The serial number is printed on the label on the bottom or rear of the housing. It is also visible in the device information page of the web interface.
User questions about NIN-832-V03IPS BOSCH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual NIN-832-V03IPS - BOSCH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. NIN-832-V03IPS by BOSCH.