383 - Pressure washer AR Blue Clean - Free user manual and instructions
Find the device manual for free 383 AR Blue Clean in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Pressure Washer |
| Brand | AR Blue Clean |
| Model | 383 |
| Power Source | Corded Electric |
| Maximum Pressure | 1600 PSI |
| Maximum Flow Rate | 1.4 GPM |
| Motor Type | Induction Motor |
| Voltage | 120 V AC |
| Power Consumption | 1500 W |
| Weight | 12 lbs (5.4 kg) |
| Dimensions (L×W×H) | 15 × 10 × 8 inches |
| Water Inlet | Standard garden hose connection |
| High-Pressure Hose Length | 20 ft (6 m) |
| Power Cord Length | 35 ft (10.7 m) |
| Nozzle Type | Adjustable 0°–40° |
| Detergent System | Integrated foam cannon |
| Safety Features | Trigger lock, thermal overload protection |
| Maintenance | Run clean water after use; clean inlet filter regularly |
| Included Accessories | Spray gun, variable nozzle, detergent bottle |
| Repairability | Replacement parts available online |
Frequently Asked Questions - 383 AR Blue Clean
How do I properly start the AR Blue Clean 383 pressure washer?
To start, connect the garden hose and turn on the water supply, then plug the power cord into a grounded outlet. Press the trigger to purge air, then switch the unit on. Always release the trigger before turning the unit off.
What type of detergent can I use?
Use only pressure washer-approved detergents that are compatible with cold water. Avoid harsh chemicals like bleach or acids, as they can damage the pump and seals.
Why is the pressure output low?
Low pressure is often caused by a clogged nozzle, a blocked inlet filter, or an insufficient water supply. Check the nozzle for debris, clean the filter, and ensure the garden hose is fully open and not kinked.
Can I use hot water with this pressure washer?
No, the AR Blue Clean 383 is designed for cold water only. Using hot water can damage internal seals and the pump, leading to permanent failure.
How should I store the unit after use?
Turn off the water and power, then disconnect the hoses. Drain any residual water from the spray gun and hose. Store the pressure washer in a frost-free area to avoid freeze damage.
Is the pressure washer safe to use on a car?
Yes, but with caution. Use a wider spray angle (25°–40°) and keep the nozzle at least 12 inches from the surface. Avoid concentrated jets on trim or decals to prevent damage.
How often should I clean the nozzle?
Clean the nozzle after every few sessions or whenever you notice a change in spray pattern. Soak it in water and use a small needle or paperclip to dislodge any debris.
What safety precautions should I take?
Always wear eye protection and non-slip shoes. Never point the spray at people or pets. Keep the trigger lock engaged when not in use and check the power cord for damage before each use.
Can I connect a longer garden hose?
Yes, you can attach a longer high-pressure hose if needed, but it may slightly reduce pressure due to friction loss. Use a hose rated for the pressure output and a proper quick-connect fitting.
Where can I find replacement parts?
Replacement parts like nozzles, hoses, and seals are available on AR Blue Clean's official website and other online retailers. Always order the correct model-specific parts for safe operation.
User questions about 383 AR Blue Clean
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pressure washer in PDF format for free! Find your manual 383 - AR Blue Clean and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 383 by AR Blue Clean.