Vigor2832n - Router Draytek - Free user manual and instructions
Find the device manual for free Vigor2832n Draytek in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Dual-WAN router with wireless access point |
| Dimensions | 442 x 220 x 44 mm |
| Weight | 2.7 kg |
| Power Supply | 12V DC, 2A |
| Wireless Standard | IEEE 802.11b/g/n |
| Wireless Speed | Up to 300 Mbps |
| Antennas | 2x detachable 3 dBi antennas |
| Ethernet Ports | 2x WAN, 4x LAN 10/100/1000 Mbps |
| USB Port | 1x USB 2.0 for storage or printer |
| VPN Support | IPSec, PPTP, L2TP VPN |
| Firewall | SPI firewall, DoS protection |
| Load Balancing | Dual-WAN load balancing and failover |
| VLAN | 802.1Q VLAN tagging |
| Quality of Service | Bandwidth management and QoS |
| Management | Web GUI, CLI, SNMP |
| Mounting | 19-inch rackmountable |
| Maintenance | Wipe with a soft dry cloth |
| Spare Parts | Antennas, power adapter |
| Repairability | Modular components replaceable |
Frequently Asked Questions - Vigor2832n Draytek
How do I set up the router for the first time?
Connect your modem to the WAN1 port, then connect a computer to a LAN port. Power on the router and enter the default IP 192.168.1.1 in your browser. Follow the web setup wizard to configure your internet connection.
I forgot the admin password. How can I recover it?
Perform a factory reset by pressing and holding the RESET button for 10 seconds with the device powered on. This restores the default admin/admin credentials, but all settings will be erased.
How do I configure dual-WAN load balancing?
Go to WAN > General Setup. Configure both WAN interfaces with your ISP details. Then enable Load Balancing and set the distribution ratio or use Failover mode to switch automatically if one connection drops.
Can I use the Vigor2832n as a wireless access point only?
Yes, disable the DHCP server and NAT in the router settings, then connect one of its LAN ports to your main network. This turns it into a pure wireless access point and switch.
How to set up a VPN tunnel?
Navigate to VPN > Remote Dial-in User to create user accounts. For site-to-site VPN, go to VPN > LAN-to-LAN and enter the remote gateway IP and pre-shared key. The router supports IPSec, PPTP, and L2TP.
How do I update the firmware?
Download the latest firmware from the DrayTek website. Go to System Maintenance > Firmware Upgrade, choose the file, and click Upgrade. Do not power off during the update to avoid bricking the device.
How do I reset the router to factory defaults?
With the router powered on, use a paperclip to press and hold the RESET button for about 10 seconds until the ACT LED flashes. Release the button and wait for the router to reboot with default settings.
What is the default IP address and login credentials?
The default IP address is 192.168.1.1 and the default username and password are both admin. For security, change them after your first login.
Can I connect a USB printer to the router?
Yes, plug your printer into the USB port. In the web interface, go to USB > Printer and enable the print server. Install the associated DrayTek printer utility on your computers to share the printer.
How to enable Quality of Service (QoS)?
Go to Bandwidth Management > Quality of Service. Enable QoS and create rules to prioritize traffic by IP address, port, or protocol. Set bandwidth limits and ensure the WAN speeds are correctly entered for accurate shaping.
User questions about Vigor2832n Draytek
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual Vigor2832n - Draytek and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Vigor2832n by Draytek.
USER MANUAL Vigor2832n Draytek
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Draytek
Model : Vigor2832n
Category : Router