I98WMM1Y7B - Range hood NEFF - Free user manual and instructions
Find the device manual for free I98WMM1Y7B NEFF in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wall-mounted range hood |
| Brand | NEFF |
| Model | I98WMM1Y7B |
| Finish | Stainless steel |
| Width | 90 cm (approx.) |
| Height | 50 cm (approx.) |
| Depth | 50 cm (approx.) |
| Weight | 15 kg (approx.) |
| Power Supply | 220-240 V, 50 Hz |
| Total Power Consumption | 250 W |
| Motor Power | 220 W |
| Number of Speeds | 3 + boost |
| Maximum Extraction Rate | 720 m³/h |
| Noise Level (max speed) | 65 dB |
| Lighting Type | LED |
| Light Output | 2 x 3 W |
| Grease Filter | 2-piece stainless steel, dishwasher-safe |
| Charcoal Filter (optional) | For recirculation mode |
| Controls | Electronic push buttons |
| Extraction Modes | Air extraction / recirculation |
| Safety Features | Overheating protection, delayed shut-off |
| Maintenance | Filters dishwasher-safe |
Frequently Asked Questions - I98WMM1Y7B NEFF
How do I clean the grease filter?
Remove the filter and wash it with hot soapy water or place it in a dishwasher. Let it dry completely before reinstalling. Clean it every 2-3 months or when the filter indicator lights up.
How do I replace the charcoal filter?
For recirculation mode, remove the grease filter and insert a new charcoal filter behind it. After installation, reset the filter counter by pressing the appropriate button. Charcoal filters should be replaced every 6 months.
How do I change the LED lighting?
Switch off the power before replacing. Use a small screwdriver to gently pry out the LED module. Disconnect the connector and replace with the same type. Ensure the power is off during the entire process.
Why is my range hood noisy?
Noise may increase if filters are blocked. Check and clean the filters or replace them. Ensure the ducting is free of obstructions. High speed noise is normal, but persistent vibration may indicate loose parts; tighten any screws.
How do I activate the intensive speed?
Press the boost button on the control panel. It runs at maximum speed for about 10 minutes, then automatically reverts to the previous speed setting.
How do I reset the filter saturation indicator?
After cleaning or replacing filters, press and hold the filter reset button for 3 seconds until the indicator flashes and turns off. This ensures accurate monitoring.
What is the minimum distance from the cooking surface?
The minimum safe distance is 65 cm for gas cooktops and 50 cm for electric cooktops, but refer to the installation instructions for specific requirements.
Can I use this hood in recirculation mode without ducting?
Yes, if you install charcoal filters and ensure the recirculation outlet is open. The hood will filter air and return it to the kitchen.
How do I change the fan speed?
Use the touch control keys to cycle through speeds 1-3. Press the speed selection button repeatedly until the desired speed is displayed.
Where can I find replacement parts?
Replacement parts such as filters and LED modules are available from NEFF customer service or authorized retailers. Have your model number ready to ensure compatibility.
User questions about I98WMM1Y7B NEFF
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual I98WMM1Y7B - NEFF and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. I98WMM1Y7B by NEFF.
USER MANUAL I98WMM1Y7B NEFF
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : NEFF
Model : I98WMM1Y7B
Category : Range hood