WM10B260GC - Dishwasher SIEMENS - Free user manual and instructions
Find the device manual for free WM10B260GC SIEMENS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Freestanding/built-in dishwasher |
| Brand | Siemens |
| Model | WM10B260GC |
| Width | 60 cm |
| Height | 85 cm |
| Depth | 60 cm |
| Weight | Approximately 45 kg |
| Power supply | 220-240 V, 10 A, 50 Hz |
| Rated power | 1.1 kW |
| Water consumption | 9.5 L per standard cycle |
| Energy efficiency class | A |
| Wash programs | Eco, Intensive, Normal 60°C, Quick, Glass Care |
| Delayed start | Yes, up to 24 hours |
| Load capacity | 12 place settings |
| Salt indicator | Yes with acoustic signal |
| Rinse aid indicator | Yes |
| Cleaning filters | Removable self-cleaning filter in the wash tank |
| Safety equipment | AquaStop anti-flood protection and child lock |
| Spare parts | Filters, spray arms, door seal, heating element, wash pump |
| Repairability | Modular design for easy disassembly and part replacement |
| Documentation | Free PDF manual, 8 pages, available at notice-facile.com |
Frequently Asked Questions - WM10B260GC SIEMENS
What wash programs are available on the Siemens WM10B260GC?
The dishwasher offers Eco, Intensive, Normal 60°C, Quick and Glass Care programs. Use Eco for lightly soiled everyday loads, Intensive for pots and pans, and Glass Care for delicate glassware.
How do I load the dishwasher correctly?
Place dirty surfaces facing the spray arms. Do not block the arms. Use the lower rack for pots and plates, upper rack for glasses and small bowls, and the cutlery basket for utensils. Follow the loading diagrams in the user manual.
Why does the salt indicator remain lit?
The reservoir is empty or the salt level is low. Use only dishwasher salt and refill via the salt compartment in the base. After filling, run a rinse cycle to clear salt residue.
How do I clean the filters?
Turn the microfiber filter assembly in the wash tank and lift it out. Rinse under running water, remove food residues, and refit until it clicks. Clean the fine filter at least once a month.
What should I do if the dishwasher does not drain?
Check the drain hose for kinks or blockages. Clean the sump area under the slides and make sure the drain filter is not clogged. If the problem persists, inspect the wash pump for foreign objects.
Why is there a white film on the dishes?
This usually indicates an incorrect rinse aid setting or insufficient salt. Increase the rinse aid dosage setting and check the salt level. For very hard water, use more salt.
Can the dishwasher be connected to hot water?
Most Siemens dishwashers accept both cold and hot water up to 60°C. Connecting to hot water can reduce energy consumption, but consult the installation section of the manual for your model.
How do I activate the delayed start?
Press the Delayed start button repeatedly to set the number of hours from 1 to 24. Close the door, and the countdown will begin. The program starts automatically when the set time has elapsed.
What does the AquaStop system do?
AquaStop protects your kitchen from water damage. Electrovalves and a special hose stop the water supply immediately if a leak is detected, so the appliance is safe even while unattended.
Where can I find the free user manual?
The free PDF manual is available on notice-facile.com. Enter the model WM10B260GC and brand Siemens to download the 8-page instruction guide.
User questions about WM10B260GC SIEMENS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual WM10B260GC - SIEMENS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WM10B260GC by SIEMENS.