MAD35S1WWT - Dehumidifier MIDEA - Free user manual and instructions
Find the device manual for free MAD35S1WWT MIDEA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable Dehumidifier |
| Model | MAD35S1WWT |
| Capacity | 35 pints per day (at 80°F, 60% RH) |
| Coverage Area | Up to 1,200 square feet |
| Tank Capacity | 2.0 gallons / 7.6 liters |
| Dimensions (H × W × D) | 22.0 × 15.2 × 10.5 inches |
| Weight | 30.6 lbs / 13.9 kg |
| Power Supply | 115 V AC, 60 Hz |
| Power Consumption | 500 watts (approx.) |
| Noise Level | 48 dB (approx.) |
| Humidity Control | Digital display with adjustable humidity from 30% to 80% |
| Drain Modes | Internal tank or continuous drain (hose connection) |
| Auto Restart | Restarts automatically after unexpected power outage |
| Auto Defrost | Prevents frost build-up at low temperatures |
| Filter | Washable, reusable dust filter |
| Maintenance | Clean filter every few weeks; empty tank regularly |
| Safety Features | Auto shut-off when tank is full; tip-over protection |
| Controls | Electronic controls with digital readout and indicator lights |
| Mobility | Built-in handles and caster wheels for portability |
| Warranty | Standard 1-year limited warranty |
Frequently Asked Questions - MAD35S1WWT MIDEA
How do I set up my Midea MAD35S1WWT dehumidifier?
Place the unit on a flat, solid surface with at least 20 inches (50 cm) of clearance on all sides. Plug it into a grounded wall outlet and press the power button. The dehumidifier will start and automatically maintain the desired humidity level (default is 50%). Ensure the water tank is correctly inserted before use.
How do I use the continuous drain feature?
Attach a standard garden hose (not included) to the continuous drain port on the back of the unit. Remove the rubber cap from the drain port. Lead the hose to a suitable floor drain or sink. The dehumidifier will then continuously drain water, bypassing the internal tank. Make sure the hose is not kinked and the drain is lower than the port for proper gravity flow.
How often should I clean the air filter?
Check the filter every two weeks and clean it when you see visible dust or dirt. To clean, open the rear grille and remove the filter. Rinse it under lukewarm water and let it dry completely before reinserting. A clean filter improves airflow and overall performance.
What does error code 'E1' mean on the display?
Error code E1 typically indicates a sensor or component malfunction. This could be the humidity sensor or a thermistor issue. Try unplugging the unit for 5 minutes and plugging it back in to reset. If the error persists, contact Midea customer support for professional diagnosis and repair.
How do I empty the water tank?
When the tank is full, the unit automatically shuts off and the 'Full' indicator lights up. Carefully pull the tank out from the front or side, grip it with both hands, and carry it to a sink. Open the cap or pour out the water, then reinstall the tank securely. The unit will resume operation automatically.
Can I adjust the target humidity level?
Yes, press the '+' or '-' buttons on the control panel to adjust the desired humidity level between 30% and 80%. The digital display will show your selected setting. The dehumidifier will run until the room reaches that set humidity, then cycle off automatically.
What is the recommended maintenance routine?
Clean the air filter every 2 weeks to maintain airflow. Wipe the exterior with a damp cloth as needed. Check the water tank and drain port for mold or algae buildup, and clean with a mild vinegar solution if necessary. Before storing, drain all water and allow the unit to dry.
Is it safe to leave the dehumidifier on while I am away?
Yes, the MAD35S1WWT is designed with auto shut-off when the tank is full and built-in overheat protection. However, it is important to ensure the unit is on a stable surface and the filter is clean. If you use continuous drain, verify the hose is secure and unobstructed to prevent potential flooding.
How should I store the dehumidifier at the end of the season?
Turn off and unplug the unit. Empty the water tank completely and let it dry. Clean or replace the filter. Disconnect any drain hose. Store the unit indoors in a dry, clean place, away from direct sunlight and extreme temperatures. Cover it with a cloth or original packaging to prevent dust accumulation.
What is the optimal operating temperature range for this dehumidifier?
The MAD35S1WWT works best in temperatures between 41°F (5°C) and 95°F (35°C). At lower temperatures, the auto defrost function will activate to protect the unit. For maximum efficiency, maintain an ambient temperature of 60–80°F (15–27°C) and relative humidity above 30%.
User questions about MAD35S1WWT MIDEA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dehumidifier in PDF format for free! Find your manual MAD35S1WWT - MIDEA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MAD35S1WWT by MIDEA.
USER MANUAL MAD35S1WWT MIDEA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MIDEA
Model : MAD35S1WWT
Category : Dehumidifier