CE-MT2E12-S1 - Flat Screen Mount Siig - Free user manual and instructions
Find the device manual for free CE-MT2E12-S1 Siig in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Flat Screen Mount |
| Brand | Siig |
| Model | CE-MT2E12-S1 |
| Recommended Screen Size | 32 to 60 inches |
| VESA Compatibility | 100x100, 200x100, 200x200, 300x200, 300x300, 400x200, 400x400 mm |
| Maximum Weight Capacity | 50 lbs (22.7 kg) |
| Tilt Adjustment | 0° to 15° (preloaded tension) |
| Profile (Distance from Wall) | 1.2 to 2.0 inches (30–50 mm) |
| Material | Cold-rolled steel with anti-corrosion finish |
| Color | Black (powder-coated) |
| Mounting Type | Wall mount (flat screen) |
| Stud Compatibility | 16" and 24" wall studs |
| Cable Management | Integrated cable clips for neat routing |
| Installation | Manual installation with included hardware |
| Power Supply | Not required (passive device) |
| Cleaning and Maintenance | Wipe gently with a dry or slightly damp cloth; avoid chemical cleaners |
| Safety Checks | Regularly inspect wall mount screws and fasteners |
| Spare Parts Availability | Contact Siig customer support or authorized dealers |
| Repairability | Mechanical parts can be replaced; no electronics inside |
| Package Contents | Mount, wall plate, arm assembly, screws, anchors, user manual |
Frequently Asked Questions - CE-MT2E12-S1 Siig
What is the maximum TV weight this Siig mount can hold?
This mount supports up to 50 lbs (22.7 kg). Always verify your TV's weight before installation to ensure compatibility.
What VESA patterns are compatible?
It fits VESA patterns from 100x100 mm to 400x400 mm, including 200x100, 200x200, 300x200, 300x300, and 400x200.
Can I tilt the TV to reduce glare?
Yes, the mount offers 0° to 15° tilt adjustment, allowing you to angle the screen for optimal viewing and reduced glare.
Does this mount allow side-to-side swiveling?
This model is a tilt mount designed for flush, low-profile installation; it does not swivel left or right. For swivel, consider an articulating mount.
Is the mount difficult to install?
Installation is straightforward with the included mounting hardware and user manual. You'll need a drill, a level, and a screwdriver.
Can I install this on drywall?
Yes, but you must anchor into wall studs for safety. If studs are not located, use appropriate heavy-duty toggles or anchors (not included for all wall types).
What is the distance from the wall after installation?
The mount keeps the TV approximately 1.2 to 2.0 inches (30–50 mm) from the wall, creating a sleek, low-profile look.
How do I clean the mount?
Use a soft, dry cloth to wipe away dust. Avoid spray cleaners or abrasive pads, as they may damage the powder-coated finish.
Are spare parts available?
Yes, Siig offers spare parts and replacement hardware through their customer service. Check the manual for part numbers.
How often should I check the mount's safety?
At least twice a year, tighten the mounting screws and check that all locking mechanisms are secure to maintain safety.
User questions about CE-MT2E12-S1 Siig
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Flat Screen Mount in PDF format for free! Find your manual CE-MT2E12-S1 - Siig and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CE-MT2E12-S1 by Siig.
USER MANUAL CE-MT2E12-S1 Siig
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Siig
Model : CE-MT2E12-S1
Category : Flat Screen Mount