LD-FA152 - Screen SHARP - Free user manual and instructions
Find the device manual for free LD-FA152 SHARP in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LCD Monitor |
| Brand | Sharp |
| Model | LD-FA152 |
| Screen Size | 15 inches (38.1 cm) viewable |
| Display Resolution | 1024 x 768 pixels (XGA) |
| Aspect Ratio | 4:3 |
| Panel Type | TFT LCD |
| Brightness | 250 cd/m² |
| Contrast Ratio | 500:1 |
| Viewing Angle | 160° horizontal / 140° vertical |
| Response Time | 16 ms |
| Input Interface | VGA (D-Sub) |
| Power Requirements | AC 100-240V, 50/60 Hz |
| Power Consumption | 30 W (max), <1 W in standby |
| Dimensions (W x H x D) | 11.4" x 8.9" x 5.5" (290 x 226 x 140 mm) approx. |
| Weight | 2.9 kg (6.4 lbs) approx. |
| VESA Mounting | 75 x 75 mm |
| OSD Controls | Buttons on the front bezel |
| Cleaning Instructions | Wipe gently with a soft dry microfiber cloth |
| Safety Compliance | CE, RoHS |
| Spare Parts & Repair | Available through authorized Sharp service centers |
Frequently Asked Questions - LD-FA152 SHARP
What is the native resolution of the Sharp LD-FA152?
The native resolution is 1024 x 768 (XGA). For the clearest image, set your computer to this resolution. The monitor automatically scales other resolutions to fit the screen.
How do I connect the LD-FA152 to my PC?
Use a VGA cable to connect the monitor's VGA (D-Sub) port to the computer's video output. Make sure both devices are powered off before connecting, then turn them on and press the Auto Config button (if available) to optimize the picture.
How can I adjust the display settings like brightness or contrast?
Press the Menu button on the front bezel to open the OSD (On-Screen Display). Use the navigation buttons to select "Brightness" and "Contrast", then adjust using the +/- buttons. Press Menu again to exit.
What should I do if the screen is blank after powering on?
Check that the power cord is plugged in and the power button is on. Verify the VGA cable is securely connected. If using a desktop, ensure the graphics card outputs a signal. Try an alternative cable or port.
How do I clean the LCD screen?
Use a soft, dry microfiber cloth. If needed, lightly dampen the cloth with water or a specialized LCD cleaner. Never spray liquid directly on the screen. Avoid using abrasive materials or harsh chemicals.
Can I wall-mount the LD-FA152?
Yes, the monitor is VESA compliant with a 75 x 75 mm mount pattern. Use a compatible wall-mount bracket and follow the bracket's installation instructions. Ensure the wall can support the monitor's weight.
What is the power consumption of the monitor?
The LD-FA152 uses approximately 30 Watts during normal operation and less than 1 Watt in standby mode. To save energy, turn off the monitor when not in use.
Does the LD-FA152 have built-in speakers?
No, this model does not have integrated speakers. It is a display-only monitor. To get audio, connect external speakers or headphones to your computer.
How do I reset the monitor to factory settings?
Press the Menu button, navigate to the "Other" or "Setup" section, select Reset, and confirm. This restores the factory default settings for brightness, contrast, color, and geometry.
Where can I purchase spare parts or get my monitor repaired?
Contact an authorized Sharp service center. Replacement parts such as the power board, buttons, or cables can be ordered through them. Refer to the warranty card for service details.
User questions about LD-FA152 SHARP
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Screen in PDF format for free! Find your manual LD-FA152 - SHARP and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LD-FA152 by SHARP.
USER MANUAL LD-FA152 SHARP
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SHARP
Model : LD-FA152
Category : Screen