CV355-30X-IP - Camera MARSHALL - Free user manual and instructions
Find the device manual for free CV355-30X-IP MARSHALL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Professional IP Camera with Pan/Tilt/Zoom |
| Brand | Marshall |
| Model | CV355-30X-IP |
| Image Sensor | 1/2.8-inch Exmor CMOS |
| Resolution | 1920 x 1080 pixels (Full HD) |
| Optical Zoom | 30x, focal length 4.3 mm to 129 mm |
| Minimum Illumination | 0.01 lux (color) |
| Video Compression | H.265 / H.264 / MJPEG |
| Network Interface | 10/100/1000 Mbps Ethernet (RJ-45) |
| Network Protocols | ONVIF, RTSP, RTMP, TCP/IP, HTTP |
| Power Supply | Power over Ethernet (PoE) IEEE 802.3af |
| Power Consumption | 12 V DC, 1.5 A (max 18 W) |
| Dimensions (W x H x D) | 143 mm x 112 mm x 165 mm |
| Weight | 1.2 kg |
| Mounting Options | Ceiling, wall, or shelf mount |
| Operating Temperature | -10 °C to +50 °C |
| Ingress Protection | Indoor use only (IP50) |
| Pan / Tilt Range | Pan 360°, tilt -30° to +90° |
| Storage | MicroSD/SDHC card slot (up to 256 GB) |
| Audio | Built-in audio input/output, two-way audio |
| Maintenance | Clean the lens with a soft, dry cloth; avoid solvents |
| Safety | Use only a certified power supply; follow electrical safety instructions |
| Spare Parts | Available through Marshall authorized service centers |
| General Information | Manual covers installation, network setup, PTZ control, and troubleshooting |
Frequently Asked Questions - CV355-30X-IP MARSHALL
How do I reset the camera to factory defaults?
Press and hold the reset button on the camera for 5 seconds while the power is on. The camera will reboot and restore all settings to factory defaults. Ensure you have backed up any important configurations before resetting.
Can the CV355-30X-IP be used outdoors?
No, this camera is designed for indoor use only. It has an IP50 rating, which means it is protected against dust but not against water. If you need an outdoor-rated camera, consider a model with an IP66 rating or install this unit in a protective housing.
How do I update the firmware on the camera?
Download the latest firmware from the Marshall support website. Then, access the camera's web interface, go to the Maintenance or System section, and select 'Firmware Update'. Upload the downloaded file and follow the on-screen prompts. Do not power off during the update.
What network protocols does the camera support?
The camera supports ONVIF, RTSP, RTMP, TCP/IP, HTTP, and other standard protocols. This allows compatibility with most video management software (VMS) and streaming platforms.
Does the camera support Power over Ethernet (PoE)?
Yes, the CV355-30X-IP supports PoE (IEEE 802.3af), allowing both power and network connectivity over a single Ethernet cable. This simplifies installation. Alternatively, you can use the 12V DC power adapter if PoE is not available.
What is the maximum recording resolution?
The camera provides Full HD 1080p (1920 x 1080) resolution at up to 60 frames per second. For low-bandwidth applications, it also supports lower resolutions such as 720p and D1.
How do I clean the camera lens properly?
Use a soft, dry microfiber cloth to gently wipe the lens in a circular motion. If stubborn dirt remains, slightly dampen the cloth with a small amount of lens cleaner or water. Never use abrasive materials or harsh chemicals, and avoid touching the lens with fingers.
Can I record video to an SD card directly?
Yes, the camera has a MicroSD/SDHC card slot for local recording. Insert a card (up to 256 GB) and configure recording settings in the web interface. Support for continuous-, motion-triggered-, and scheduled recording is available.
How do I perform pan and tilt movements?
You can control the pan and tilt via the web interface, the included remote control (if supported), or through ONVIF commands from third-party software. The camera provides smooth 360° pan and -30° to +90° tilt for wide coverage.
What should I do if the camera loses network connection?
First, check the Ethernet cable and ensure the network switch/router is powered. Verify that the camera's IP address is correctly configured. If the issue persists, reboot the camera or perform a factory reset. Also, check firewall settings to allow the camera's ports.
User questions about CV355-30X-IP MARSHALL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Camera in PDF format for free! Find your manual CV355-30X-IP - MARSHALL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CV355-30X-IP by MARSHALL.
USER MANUAL CV355-30X-IP MARSHALL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MARSHALL
Model : CV355-30X-IP
Category : Camera