Intellivox DSX430D - Speakers JBL - Free user manual and instructions
Find the device manual for free Intellivox DSX430D JBL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Active column loudspeaker with digital beam steering |
| Brand | JBL |
| Model | Intellivox DSX430D |
| Application | Fixed installation for speech reinforcement in reverberant spaces |
| Transducer Complement | 4 x 3.5" (89 mm) full-range drivers |
| Frequency Response | 120 Hz - 20 kHz (-10 dB) |
| Horizontal Coverage | 90 degrees |
| Vertical Coverage | Digitally steerable up to 30 degrees |
| Maximum SPL | 120 dB peak |
| Power Handling | 150 W continuous, 600 W peak |
| Inputs | Balanced line-level, Phoenix type connector |
| DSP | Built-in digital signal processing with presets |
| Operating Voltage | 100-240 V AC, 50/60 Hz |
| Enclosure Material | Extruded aluminum with perforated steel grille |
| Dimensions (H x W x D) | Approx. 625 x 85 x 90 mm |
| Weight | Approx. 7.5 kg (16.5 lbs) |
| Installation | Wall-mount bracket included |
| Protection Rating | IP30 |
| Operating Temperature | 0 to 50 degrees Celsius |
| Cleaning Instructions | Wipe with a soft dry cloth; avoid liquids and abrasive cleaners |
| Safety Compliance | CE marked; installation per local codes |
| Spare Parts / Service | Contact authorized JBL service centers for repairs |
Frequently Asked Questions - Intellivox DSX430D JBL
How do I connect an audio source to the Intellivox DSX430D?
Connect a balanced line-level signal to the Phoenix-style input connector. Use high-quality shielded twisted-pair cable, and ensure secure wiring. Then, select the appropriate preset via the DSP configuration.
Can the Intellivox DSX430D be used outdoors?
The IP30 rating makes it suitable for indoor use only. For outdoor applications, protect it from direct rain and moisture or use an IP-rated enclosure. It is best applied in covered venues.
How do I adjust the beam steering angle?
Beam steering is configured using the JBL Intellivox software. Connect a PC to the speaker's control port, open the software, and adjust the vertical steering angle and focus area. Store the settings in the speaker's onboard memory.
What is the recommended mounting height for the DSX430D?
For optimal coverage, mount the speaker at a height of 3 to 5 meters, aiming slightly downward so the first rows and rear areas receive balanced sound. Use a laser or software simulation for precise alignment.
Can I daisy-chain multiple Intellivox speakers?
Yes, the DSX430D supports loop-through connections. Use balanced audio cables to link multiple units. However, consider the total cable length and the drive capability. Use a distribution amplifier if more than a few speakers are connected.
What type of cable is recommended for installation?
Use a 2-conductor shielded cable with a braided shield for the balanced audio signal. For power, use a 3-wire cord with proper grounding. Avoid running audio and power cables in parallel to prevent interference.
Does the speaker require an external amplifier?
No, the DSX430D is an active loudspeaker with a built-in power amplifier and DSP. It accepts a line-level signal directly from a mixer, preamp, or media player.
How do I reset the speaker to factory settings?
Use the control software to restore the factory preset. Alternatively, perform a hardware reset by keeping the reset button pressed for 10 seconds. This will clear all customer-specific settings and return to default presets.
What is the horizontal and vertical coverage pattern of the DSX430D?
The speaker provides a wide horizontal coverage of 90 degrees. The vertical coverage is digitally steerable, allowing focus on specific listener areas while reducing reflections. The maximum steering angle is approximately 30 degrees with reduced output at extreme angles.
How should I clean and maintain the front grille?
Turn off the speaker and use a soft, dry brush or microfiber cloth to gently remove dust from the grille. Do not blow compressed air directly into the drivers. Clean the enclosure using a slightly damp cloth with mild detergent, then dry immediately. Avoid solvents.
User questions about Intellivox DSX430D JBL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Speakers in PDF format for free! Find your manual Intellivox DSX430D - JBL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Intellivox DSX430D by JBL.
USER MANUAL Intellivox DSX430D JBL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : JBL
Model : Intellivox DSX430D
Category : Speakers